Rohde ST 410 (280 pages)
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to turn on and off the control unit?
To turn on the control unit, press and hold the power button until the display lights up. To turn it off, press and hold the power button again until the display turns off. Ensure the unit is properly connected to the power source before operating.
What are the main features of the control unit?
The control unit offers 32 programmable heating cycles with up to 32 segments each, adjustable heating rates, temperature display in °C or °F, energy consumption display, alarm functions, and a USB interface for data logging. The ST 411 model also includes a built-in WLAN module for wireless connectivity.
How to program the heating cycle?
To program the heating cycle, navigate to the programming menu using the control unit's interface. Adjust the heating segments, set the heating rate, and configure the ramp-up and ramp-down times. For the ST 411 model, you can also program additional functions like the exhaust flap and cooling system.
What is the maximum heating rate available?
The control unit allows heating rates between 1 °C/h and 999 °C/h, with the option to set it to 'FULL' for maximum heating speed. This range is suitable for various applications, including ceramic and glass heating.
How to connect the control unit to the oven?
The control unit connects to the oven via a 14-pin CPC-14 connector. Ensure the connector is properly seated and secured with the bayonet lock. The black 14-pin socket is located on the oven's terminal box, near the electrical wiring.
What is the power supply requirement for the control unit?
The control unit requires a power supply of 100-240 V AC, 50-60 Hz, with a current rating of 1.0 A. It uses a 3.15 A slow-blow fuse, rated for 5 mm x 20 mm, with a ceramic and HRC housing.
What safety precautions should be taken?
Ensure the control unit is installed at a safe distance from the oven and not exposed to direct heat. Never place the control unit on the oven. Always follow the safety instructions provided in the manual and ensure the unit is properly grounded and protected from electrical faults.
How to check the oven's operating status?
The control unit's display shows the current operating status, including temperature, heating rate, and program progress. A blinking colored dot indicates that the heating function is active. The 'Data Transfer' indicator shows if data is being transmitted via USB.
What is the purpose of the USB interface?
The USB interface allows for data logging of measured values, including temperature and energy consumption. It can be used to transfer data to a USB stick for analysis or record-keeping. The interface also supports real-time clock functions and date/time adjustments.
How to handle a power outage during operation?
In the event of a power outage, the control unit will automatically resume the heating process once power is restored. Ensure the unit is properly connected to the power source and that the program settings are correctly configured to maintain consistent heating performance.