Salda Stouch (98 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the Stouch remote control used for?
The Stouch remote control is designed to operate SALDA recuperation systems, air supply and extraction units, SALDA fans with EC motors, and Modbus protocol devices. It supports various models including RIS/RIRS 3.0, RIS/RIRS EKO 3.0, RIRS 200 VER EKO, and RIRS 300 VE... EKO.
What are the key features of the Stouch remote control?
The Stouch remote control features an ergonomic design, a plastic housing, a glass screen, and a touch-sensitive interface. It also includes a backlight for touch responses, CO2 and pressure sensor support, and the ability to connect to BMS networks. It offers four adjustable fan speeds, a boost mode, child lock, and a user menu for settings.
How do you install the Stouch remote control?
To install the Stouch remote control, first disconnect the cover from the housing. Connect the cable to the remote control, ensuring the correct pin connections. Mark the drilling positions on the wall, drill 5 mm holes for nylon anchors, and secure the unit using the provided screws. If the wiring is from the opposite side, make a cut in the housing to route the cables.
What are the electrical connections for the Stouch remote control?
The Stouch remote control requires a 24V AC/DC power supply, GND, RS485 A and B for Modbus, 0-10 VDC input for sensors, and 0-10 VDC output for fan control. It is important to use a continuous DC power supply when connecting to an air quality converter, and the power supply must be selected based on the current requirements of the remote control and converter.
How do you set the fan speed on the Stouch remote control?
To set the fan speed, press and hold the B2 button to enter the speed settings. Use B4 and B6 to adjust the speed in 5% increments. The LED indicators L4-L7 show the selected speed. The maximum boost mode runs for up to 180 minutes and can be activated by pressing B5.
How does the Stouch remote control handle faults?
The Stouch remote control displays fault codes such as A.01, A.02, etc., using LED indicators and the segment screen. Faults can be cleared by pressing B2 and B3 for 3 seconds, but only after the cause is resolved. Servicing personnel must handle fault clearance to ensure safety and proper operation.
What are the temperature settings on the Stouch remote control?
The Stouch remote control allows setting the desired temperature between 15°C and 35°C. It displays both the set temperature and the actual air temperature alternately, with the set temperature shown for 5 seconds and the actual temperature for 2 seconds.
Can the Stouch remote control be used with Modbus?
Yes, the Stouch remote control supports a fully configurable Modbus interface. It can act as both a master and slave device in a Modbus network. It can be controlled and configured via the Modbus interface in addition to the user menu, allowing for advanced system integration.
How do you access the user menu on the Stouch remote control?
To access the user menu, press and hold B2 and B3 for 3 seconds. The menu displays settings such as sleep mode, sound level, temperature display, and CO2 parameters. Use B4 and B6 to navigate and select parameters, and press B5 to confirm and save changes.
What are the operational limitations of the Stouch remote control?
The Stouch remote control is designed for use with specific SALDA systems and requires proper installation and electrical connections. It cannot control standalone humidifiers or certain models without integrated automation. The remote control must be installed in a safe location and should not be left connected to the system's automation box.