Symbol LL 500 (84 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I connect the LL 500 to the host device?
To connect the LL 500 to the host device, ensure the host is powered down. Connect the 40-pin host cable to the HOST port on the LL 500. If your cable lacks a 40-pin connector, proceed to the next step.
What types of host ports are supported by the LL 500?
The LL 500 supports connections to various host ports including OCIA, OCR, IBM 468x/9x, RS-232C terminals, POS internal connections, and keyboard wedge setups. Refer to the Product Reference Guide for detailed instructions.
How do I connect the LL 500 to an RS-232C device?
If your host cable connects to an RS-232C device, use the pin-outs defined in the LL 500 Product Reference Guide. Ensure the cable is properly connected to the host terminal and the scanner ports.
What is the purpose of the power selection plug?
The power selection plug allows you to connect an external power supply. If you are not using an external power supply, ensure the plug is inserted to power the LL 500. The power supply must comply with local regulations.
How do I attach a scanner to the LL 500?
Attach the scanner to either the Primary Scanner Port or the Secondary Scanner Port. The scanner cable connector will only fit into one of these ports. Ensure the scanner is properly connected for operation.
Can I use a magstripe reader with the LL 500?
Yes, you can use a magstripe reader by plugging it into the Magstripe Port. Some configurations, such as LL-500-I20X-170Y and LL500-I20X-80Y, only support the Primary Scanner Port for scanner connections.
What should I do if the LL 500 is not working?
If the LL 500 is not working, check that the power selection plug is connected if you are not using an external power supply. Ensure all cables are properly connected to the host, scanner ports, and power source.
What are the requirements for the power supply?
The power supply must comply with all local regulations. If you are using an external power supply, connect it to the power selection plug. If not, ensure the power selection plug is plugged in to power the device.
How do I connect the host cable to the keyboard wedge?
To connect the host cable to a keyboard wedge, first unplug the keyboard at the terminal end. Then, attach one end of the host cable to the end of the keyboard cable. Finally, connect the remaining end to the host terminal's keyboard port.
What if my cable does not have a 40-pin connector?
If your cable does not have a 40-pin connector, skip the step of connecting to the HOST port and proceed to connect the cable to the appropriate port on the host device, such as the RS-232C port or keyboard wedge setup.