Truma CP plus VarioHeat (88 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to switch between heating and climate control modes?
To switch between heating (HEIZ) and climate control (AC) modes, use the Dreh-/Drückknopf to select the desired mode in the Menüzeile (3). Confirm your selection by pressing the Dreh-/Drückknopf. The display will show the selected mode, and the system will adjust accordingly.
How to adjust the room temperature?
To adjust the room temperature, use the Dreh-/Drückknopf to select the desired temperature in the Menüzeile (3). Confirm your selection by pressing the Dreh-/Drückknopf. The system will then adjust the temperature to match your setting.
How to set the timer?
To set the timer, use the Dreh-/Drückknopf to select the start and end times in the Menüzeile (4). Confirm your selection by pressing the Dreh-/Drückknopf. The system will activate the heating or climate control at the specified times.
How to choose the energy type?
To choose the energy type, use the Dreh-/Drückknopf to select the desired energy type (e.g., GAS, EL1, EL2) in the Menüzeile (3). Confirm your selection by pressing the Dreh-/Drückknopf. The system will then operate using the selected energy source.
How to adjust the fan speed?
To adjust the fan speed, use the Dreh-/Drückknopf to select the desired fan speed (e.g., LOW, MID, HIGH, NIGHT, AUTO) in the Menüzeile (3). Confirm your selection by pressing the Dreh-/Drückknopf. The system will then operate with the selected fan speed.
How to turn the unit on or off?
To turn the unit on, press the Dreh-/Drückknopf briefly. The display will switch between time and set room temperature. To turn the unit off, press the Dreh-/Drückknopf for more than 4 seconds. The display will show 'OFF' during the shutdown process.
How to use the APP mode with iNet Box?
To use the APP mode with an iNet Box, press the Dreh-/Drückknopf for about 2 seconds until 'APP' appears on the display. Release the Dreh-/Drückknopf. The APP mode will activate, allowing remote control of connected devices via the Truma App or IR remote.
How to handle safety warnings?
If a warning or fault is displayed, refer to the troubleshooting section in the manual. Do not attempt to fix the issue yourself unless the solution is described there. Always ensure the unit is turned off before performing any maintenance or repairs.
How to reset the system?
To reset the system, navigate to the 'Servicemenü' and select 'RESET' followed by 'PR SET'. This will initialize the unit and reconfigure the connected devices. Ensure the system is powered off before resetting.
How to handle gas system safety?
Never use gas appliances while refueling, in parking garages, or on ferries. Always turn off the Truma CP plus VarioHeat unit to prevent accidental reactivation of the heating system via the Truma App or timer. Ensure proper ventilation in enclosed spaces to avoid gas-related hazards.
Related products from Truma
CP classic
User manual 52 pages
CP classic
User manual 48 pages
CP E classic
User manual 48 pages
CP E classic
User manual 52 pages
iNet Box
User manual 52 pages
iNet Box
User manual 56 pages
iNet Box
User manual 60 pages
iNet Box
User manual 84 pages
CP plus
User manual 84 pages
CP plus
User manual 96 pages
DuoControl vertikal
User manual 40 pages
DuoControl CS horizontal
User manual 40 pages
DuoControl CS horizontal
User manual 72 pages
DuoControl CS vertikal
User manual 40 pages
DuoControl CS vertikal
User manual 72 pages
SecuMotion
User manual 44 pages
SecuMotion
User manual 56 pages
SecuMotion
User manual 72 pages
DuoControl
User manual 52 pages
DuoControl
User manual 68 pages