Varian Turbo-V 2000 (93 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the Turbo-V 2000 ICE controller used for?
The Turbo-V 2000 ICE controller is a microprocessor-controlled frequency converter designed to operate the Turbo-V 2000 ICE pump series. It controls the pump's speed during startup by monitoring voltage and current in relation to the pump's speed, and includes automatic operation and self-diagnostic features.
What are the voltage requirements for the Turbo-V 2000 ICE controller?
The Turbo-V 2000 ICE controller models 969-9448 and 969-9449 are designed for 220 Vac and 120 Vac respectively. Ensure the correct voltage is selected before reconnecting the power cable.
How do I start the pump using the controller?
To start the pump, press the START button on the front panel of the controller. This initiates the pump's startup sequence, which includes monitoring voltage and current to ensure safe operation.
What should I do if the pump stops automatically?
If the pump stops automatically due to a fault, press the START button once to reset the controller and then press it again to restart the pump. Ensure the pump's inlet flange is properly connected and sealed.
What are the environmental conditions required for storage and operation?
The controller should be stored and operated in environments with temperatures between -20 °C and +70 °C, and relative humidity between 0-95% (non-condensing). Ensure proper ventilation for cooling.
What safety precautions should I take when handling the controller?
Always disconnect the power cable before performing any installation or maintenance. The controller contains high voltages that can cause serious injury or death. Use the provided three-wire cable with a properly grounded outlet to prevent electrical discharges.
What are the common error messages and how to resolve them?
Common error messages include 'CHECK CONNECTION TO PUMP,' 'PUMP WAITING INTERLOCK,' and 'FAULT: PUMP OVERTEMP.' For 'CHECK CONNECTION TO PUMP,' verify the cable connection between the pump and controller. For 'PUMP WAITING INTERLOCK,' restore the short circuit or close the interlock signal. For 'FAULT: PUMP OVERTEMP,' wait for the temperature to drop below the threshold and restart the pump.
How do I access the pump's operational parameters?
Press the button labeled 'cycle number, cycle time, and pump life' to view the pump's operational parameters on the display. For more detailed parameters like current, temperature, and flow rate, press the button labeled 'pump current, pump temperature, pump power, rotational speed, flow value, gas type, and alarm state.'
What is the purpose of the serial communication port on the controller?
The serial communication port (J13) allows for remote control and data exchange with the controller. It supports RS 232, RS 422, and RS 485 communication protocols, enabling advanced control and monitoring of the pump's operation.
What should I do if the controller fails and needs repair?
In case of a controller failure, contact Varian's repair service or use the Varian advanced exchange service, which provides a regenerated controller as a replacement. Ensure proper disposal of the faulty unit in accordance with national regulations.
Related products from Varian
Turbo-V70
User manual 41 pages
Turbo-V70
User manual 79 pages
Turbo-V 550
User manual 42 pages
Turbo-V 550
User manual 98 pages
Turbo-V 550
User manual 99 pages
Turbo-V 550
User manual 100 pages
969-9461
User manual 56 pages
Turbo-V 81-AG
User manual 59 pages
Turbo-V 81-AG
User manual 111 pages
Turbo-V 150
User manual 78 pages
Turbo-V 300HT
User manual 84 pages
Turbo-V 2000 ICE
User manual 93 pages
Turbo-V 301-AG
User manual 116 pages