HANSGROHE ShowerSelect S (80 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum operating pressure for the product?
The maximum operating pressure for the product is 1 MPa, which is equivalent to 10 bar or 147 PSI.
What is the recommended hot water temperature?
The recommended hot water temperature is 65°C, which ensures optimal performance and safety.
How should the product be installed to prevent scalding?
To prevent scalding, the product should be installed with the Safety Function enabled, which allows pre-setting the maximum temperature, such as up to 42°C.
What should be done if the water temperature at the outlet does not match the thermostat setting?
If the water temperature at the outlet does not match the thermostat setting, check the thermostat calibration and ensure the hot water temperature is set between 42°C and 65°C.
What are the safety precautions during installation?
During installation, wear gloves to prevent crushing and cutting injuries. Ensure the product is installed according to local plumbing codes and that the pressure balance between hot and cold water is maintained.
What should be done if the product is leaking after installation?
If the product is leaking after installation, check the pressure supply, clean or replace the filter, and ensure the thermostat is properly calibrated. Also, inspect the check valves for blockages or damage.
How often should the check valves be inspected?
The check valves should be inspected regularly according to DIN EN 1717 standards, at least once a year, and cleaned or replaced if necessary to ensure proper function.
What should be done if the pushbutton does not snap in?
If the pushbutton does not snap in, check if the seal is damaged or needs greasing. Clean or replace the seal, and ensure the pushbutton is fully pressed into the rosette before mounting.
What are the color codes for the product variants?
The color codes for the product variants are: 000 = chrome, 140 = brushed bronze, 250 = brushed gold-optic, 400 = white/chrome, 450 = white, 600 = black/chrome, and 610 = black.
What should be done if the product is not working with a positive head pump?
If the product is not working with a positive head pump, ensure that it is installed with a negative head switching system, as it is not compatible with positive head pumps.