Cleco 48EAE75F3 (136 pages)
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum cable length for the nutrunner control?
The maximum cable length for the nutrunner control is 65.6 feet (20 meters). If the cable length exceeds this, an APEX isolating transformer, order number 544185PT, is required to ensure safe operation.
What are the input voltage specifications for the mPro400GC-P model?
The mPro400GC-P model operates on a single-phase input voltage of 115 VAC (104-126 VAC) with a frequency of 50-60 Hz and a maximum input current of 16 A.
What safety precautions should be taken when using the nutrunner control?
When using the nutrunner control, ensure the workplace is clean and well-lit, avoid using it in explosive environments, and keep the tool away from moisture. Always use a reaction bar for high torque applications and ensure the tool is properly grounded.
How should the nutrunner control be connected to the power supply?
The nutrunner control should be connected to a grounded network (TN network). Ensure all connections are properly made before energizing the tool. Use enclosed power cables and avoid exposing the tool to heat, oil, or sharp edges.
What should be done if the nutrunner control emits an unusual sound or odor?
If the nutrunner control emits an unusual sound, vibration, or odor, immediately shut it off, disconnect the power supply, and have qualified personnel inspect and repair the system to prevent potential injury or damage.
What are the ambient conditions for the nutrunner control?
The nutrunner control should be used in environments with temperatures between -13°F to +158°F (-25°C to +70°C) and relative humidity up to 90%. It should be used indoors and only in industrial EMC limit value class A environments.
What is the purpose of the LED display on the nutrunner control?
The LED display on the nutrunner control provides information about the current rundown result, including torque and angle settings. It also indicates the status of the tool, such as OK or NOK, to help the operator monitor performance.
What are the safety requirements for using the electric tools?
Always read and follow all safety instructions for electric tools to prevent electric shock, fire, or serious injury. Keep the tool away from moisture, avoid using it in explosive environments, and ensure the tool is properly grounded and maintained.
What should be done before initial operation of the nutrunner control?
Before initial operation, ensure the tool cable is securely attached to both the tool and controller. Verify that the controller is powered on and properly programmed. Check that the reverse mechanism is in the correct position and that all connections are made correctly.
What are the recommended practices for maintenance of the nutrunner control?
Establish a regular maintenance program to ensure compliance with safety regulations and proper functioning. Test the earth fault protector according to local regulations and inspect the tool for any defects or damage before each use.
Related products from Cleco
MP2452
User manual 20 pages
MP2454
User manual 20 pages
35STHFC40Q
User manual 30 pages
35STHFC404
User manual 30 pages
NeoTek 70 Serie
User manual 42 pages
NeoTek 70 Serie
User manual 76 pages
48EAE37F2
User manual 136 pages
48EAE52F2
User manual 136 pages
48EAE53F3
User manual 136 pages
48EAE175AX6
User manual 136 pages
48EAE58AM3
User manual 136 pages
48EAE41AM3
User manual 136 pages
48EPE150D4
User manual 136 pages
48EAE90AH4
User manual 136 pages
48EAE230F4
User manual 136 pages
48EAE135MH4
User manual 136 pages
48EAE105AH4
User manual 136 pages
48EAE110F3
User manual 136 pages
48EAE135F4
User manual 136 pages
48EAE230AX6
User manual 136 pages