Flex KNE 16 18-EC (240 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to check the battery status?
To check the battery status, press the button to view the LED indicator on the battery status display. If the LED blinks, the battery needs charging. If no LED lights up after pressing the button, the battery is faulty and must be replaced.
How to insert or remove the battery?
To insert the battery, press the button until it fully clicks into the tool. Push the switch lever forward and hold it. To remove the battery, press the release button and pull it out. Always ensure the tool is off before handling the battery.
What safety precautions should be taken when using the tool?
Always wear safety goggles, work gloves, and sturdy footwear. Avoid placing hands in the cutting area. Ensure the machine is off before removing chips or debris. Never operate the tool if the battery is damaged or not properly installed.
What is the maximum thickness of steel that can be cut?
The tool can cut steel up to a maximum thickness of 2 mm for 400 N/mm², 2.5 mm for 600 N/mm², and 3 mm for 800 N/mm². Always ensure the material is within these limits to avoid damage to the tool or material.
How to change the cutting direction?
To change the cutting direction, remove the battery, loosen the ratchet wheel, pull out the matrix holder about 3 mm, and rotate it to the desired direction. Tighten the ratchet wheel again to secure the new position.
What should be done before starting the tool?
Before starting the tool, ensure the battery is fully charged. Check for any damage to the tool or battery. Make sure the machine is off and the area is clear of any obstacles or debris to prevent accidents.
How to maintain the tool for optimal performance?
Regularly clean the tool and ventilation slots. Use dry compressed air to blow out dust from the motor housing. Clean the dust filter frequently. Avoid using the tool on damaged or corroded materials to prolong its lifespan.
What should be done if the tool overheats?
If the tool overheats, it will automatically shut off to prevent damage. Allow the tool to cool down before resuming use. Ensure the tool is not used continuously for long periods without breaks to avoid overheating.
How to dispose of the tool and battery properly?
Dispose of the tool and battery according to local regulations. Do not throw batteries or tools into household waste, fire, or water. Return used batteries to authorized recycling centers to ensure proper disposal and recycling.
What is the noise level of the tool?
The A-weighted sound pressure level of the tool is 90 dB(A), and the sound power level is 101 dB(A). These values are measured according to EN 62841 standards. Prolonged exposure to these levels may cause hearing damage, so use ear protection if the sound level exceeds 85 dB(A).
Related products from Flex
L 602 VR
User manual 177 pages
L 602 VR
User manual 20 pages
ID 1/4 18.0-EC
User manual 264 pages
ID 1/4 18.0-EC
User manual 297 pages
MXE 1302
User manual 16 pages
MXE 1300
User manual 16 pages
MXE 1102
User manual 16 pages
MXE 1100
User manual 16 pages
MXE 900
User manual 16 pages
WB 110-260
User manual 144 pages
WB 110-260
User manual 18 pages
MT 18.0-EC/5.0 Set
User manual 20 pages
MT 18.0-EC/5.0 Set
User manual 180 pages
CER 18-EC
User manual 23 pages
CER 18-EC
User manual 196 pages
LDE 15-10 125 R
User manual 24 pages
LST 803 VR
User manual 200 pages
LD 18-7 125
User manual 24 pages
LD 18-7 125
User manual 112 pages
LD 18-7 125
User manual 224 pages