Resol DL2 Plus (104 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to connect the DL2 Plus to a regulator?
The DL2 Plus connects to up to 2 regulators via VBus®. Use the VBus® cable provided, connecting it to the regulator's terminals (Klemmen 1 and 2 for Channel 1, Klemmen 3 and 4 for Channel 2). A second regulator can be connected to the same device using an additional VBus® cable.
How to set up the WLAN connection for the DL2 Plus?
To set up the WLAN connection, press the button for about 1 second to activate or deactivate it. The WLAN-LED will light up orange when activated. For a direct connection, select the device's SSID (DL2Plus-{12-digit serial number}) and enter the WLAN key found on the device's underside.
How to access the web interface of the DL2 Plus?
Access the web interface by connecting to the device's IP address (http://192.168.240.1) using a web browser. If the page is encrypted (https), a security warning may appear, which can be ignored or accessed via HTTP. The web interface allows configuration, monitoring, and data management.
How to reset the DL2 Plus to factory settings?
To reset the DL2 Plus, press and hold the button for about 20 seconds. This will restart the device, reset all settings and passwords to factory defaults. After a reset, the device must be re-added to VBus.net.
What are the technical specifications of the DL2 Plus?
The DL2 Plus has an IP 20 / EN 60529 rating, operates within 0 to 40°C, and supports a maximum altitude of 2000 m. It has a power supply of 100–240 V~ and a maximum power consumption of <1.75W. It includes a 2.4 GHz WLAN module with WPA/WPA2 encryption and supports Ethernet (10/100 Base TX).
How to configure the DL2 Plus for remote access?
To configure remote access, use the web interface to set up the device's network settings, including the SSID, password, and IP address. Ensure the device is connected to a router and that the VBus.net account is properly configured for remote access.
How to connect the DL2 Plus to VBus.net?
To connect the DL2 Plus to VBus.net, ensure the device has an active internet connection (via LAN or WLAN) and a VBus.net account. Note the 8- to 10-digit alphanumeric token on the device's back, then log in to VBus.net, add the device, and enter the token to complete the setup.
How to use RPT for parameterizing the regulator?
To use RPT for parameterizing the regulator, first activate the VBus access over the local network. Download and install the RPT software, then connect to the DL2 Plus via its IP address and select the appropriate channel (Klemmen 1/2 or 3/4). Enter the password and connect to configure the regulator.
What safety precautions should be taken when installing the DL2 Plus?
Ensure the device is installed in a dry, indoor environment. Avoid strong electromagnetic interference by keeping the power and bus cables separated. Before handling the internal components, discharge static electricity by touching a grounded object. Do not operate the device if there are visible damages.
How to dispose of the DL2 Plus properly?
Dispose of the DL2 Plus in accordance with environmental regulations. Do not dispose of it with regular waste. Return old devices to an authorized recycling center. The device should be recycled through a certified process to ensure environmental safety.