Seagate DDS (185 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I configure an internal DAT drive?
To configure an internal DAT drive, use the dip switches on the underside of the drive to set the SCSI ID and other features. The default settings for SCSI ID 0 include support for both MRS and non-MRS 4-mm media, disabled parity checking, enabled data compression, and disabled power-on self-test diagnostics. For UNIX configurations, dip switches 9 and 10 are used.
What are the SCSI cable requirements for DAT drives?
Seagate DAT drives can be connected to a standard single-ended SCSI or SCSI-2 interface using a 50-conductor flat cable or a 25-signal twisted-pair cable. The cable length should not exceed 6 meters (19.5 feet). Internal drives use a 50-pin, dual-row SCSI connector, while external drives use two shielded 50-pin connectors.
What are the different DAT drive models covered in this manual?
This manual covers Seagate DAT drives that support DDS, DDS-DC, DDS-2, and DDS-3 tape formats. It includes 3.5-inch and 5.25-inch internal models, as well as external models. Each model has specific capacities and is identified by its model number, such as 4320NT for DDS and 4326XP for DDS-3.
How do I install an internal DAT drive?
Installing an internal DAT drive involves three main steps: configuring the drive using dip switches or jumpers, mounting the drive in the appropriate bay, and connecting the power and interface cables. Ensure the drive is handled with care to avoid electrostatic discharge and follow the installation procedures for your specific drive configuration.
What is the capacity of a DDS-3 DAT drive?
A DDS-3 DAT drive has a typical capacity of 24 Gbytes, assuming 2:1 data compression. The native capacity is half of this value. This capacity is achieved using the DDS-3 tape format, which supports higher data storage compared to earlier formats like DDS and DDS-DC.
How do I handle static electricity when installing a DAT drive?
To avoid electrostatic discharge, do not remove the drive from the antistatic bag until you are ready to install it. Touch a grounded metal surface before handling the drive to discharge any static electricity. Hold the drive only by its edges and avoid direct contact with electronic components.
What is the purpose of dip switches on a DAT drive?
Dip switches on a DAT drive are used to configure various settings such as the SCSI ID, termination, and data compression. They are typically located on the underside of the drive and are essential for setting up the drive for proper operation with your computer system.
What are the differences between internal and external DAT drives?
Internal DAT drives are designed for installation inside a computer case and use a 50-pin SCSI connector. External drives connect via two shielded 50-pin connectors on the rear panel and are typically used with an external enclosure. Both types support similar tape formats but differ in physical mounting and connection methods.
How do I connect power and interface cables to a DAT drive?
After mounting the drive, connect the power cable to the drive's power connector and the SCSI interface cable to the appropriate SCSI port on the host adapter. Ensure the cables are securely connected and do not exceed the maximum recommended length to avoid signal degradation.
What are the key considerations for operating a DAT drive?
When operating a DAT drive, ensure proper loading and unloading of cartridges, initialize blank cartridges before use, and clean the tape heads regularly to maintain performance. Also, monitor LED indicators for any error codes and follow the manufacturer's guidelines for optimal operation and maintenance.