Dantherm CDP 35T (116 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the purpose of the hygrostat control?
The hygrostat control regulates the humidity levels in the space by automatically starting and stopping the dehumidifier based on the measured humidity. It ensures optimal humidity conditions by maintaining the desired relative humidity level.
How does the dehumidifier operate during the drying process?
The dehumidifier works by drawing in humid air through one, two, or three fans. The air is cooled in the evaporator, causing condensation of water vapor into droplets, which are then drained. The dry, cold air is reheated in the condenser, resulting in a temperature increase of approximately 5°C. This process continues until the relative humidity in the space decreases.
What happens if the temperature drops below 20°C?
If the temperature drops below 20°C, the evaporator may frost over. The system will continue to run in dehumidification mode for an additional 30 minutes, followed by a passive defrosting process where the fan draws air over the evaporator surface, gradually melting the frost.
What is the function of the CDG3 control panel?
The CDG3 control panel is an electronic interface that manages all safety functions, control functions, and power-on/off operations. It uses LED indicators to display the operational status of the dehumidifier, including normal operation, faults, and system conditions.
How does the dehumidifier handle overheating?
If the temperature at the condenser exceeds 55°C, the compressor automatically stops to prevent overloading. After 45 minutes, the compressor restarts automatically, ensuring the system remains within safe operating limits.
What is the role of the hygrostat in the system?
The hygrostat continuously monitors the humidity levels in the space and controls the dehumidifier's operation. It ensures that the dehumidifier starts and stops based on the required humidity levels, maintaining a consistent and comfortable environment.
How is the dehumidifier connected to an external hygrostat?
To connect an external hygrostat, disconnect the built-in hygrostat from terminals 21/22 and mount the external hygrostat on the same terminals. The external hygrostat provides a 12V output, allowing for precise humidity control and adjustments.
What is the function of the LED indicators on the display?
The LED indicators on the display provide visual feedback on the dehumidifier's status. A constant green light indicates normal operation, while blinking lights signal specific conditions such as faults, defrosting, or system readiness, helping users monitor the system's performance.
What happens if the condenser temperature becomes too high?
If the condenser temperature exceeds the safe limit, the compressor automatically stops to prevent overheating and potential damage. After a 45-minute cooling period, the compressor restarts, ensuring the system operates within safe parameters.
How does the dehumidifier handle continuous ventilation?
For continuous ventilation independent of dehumidification, a loop can be established between terminals 25 and 26 in the control panel. This allows the fan to operate continuously, ensuring proper air circulation without affecting the dehumidification process.
Related products from Dantherm
CDF 35T
User manual 4 pages
CDT 22
User manual 50 pages
CDT 35
User manual 50 pages
CDT 35S
User manual 50 pages
CDT 50
User manual 50 pages
CDP 65T
User manual 4 pages
CDP 65T
User manual 116 pages
CDP 45T
User manual 4 pages
CDP 45T
User manual 114 pages
CDP 45T
User manual 116 pages
AD 290 B
User manual 84 pages
AD 240 B
User manual 84 pages
AD 400 B
User manual 104 pages
CDP 40-50-70
User manual 24 pages
CDP 40T-50T-70T
User manual 24 pages
CDP 75
User manual 68 pages
CDP 75
User manual 160 pages
CDP 75
User manual 192 pages
CDP165
User manual 68 pages
CDP165
User manual 160 pages