G21 Impact 20 (84 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
Why does the dehumidifier store less water in the tank during winter?
During winter, the air is typically drier and colder, which reduces the amount of moisture the dehumidifier can collect. This is not a fault, but rather a natural result of lower humidity levels in the environment.
Why does the dehumidifier stop running suddenly?
The dehumidifier may stop if the water tank is full, or if it is not installed correctly. Check the water tank and ensure it is properly placed. Additionally, the appliance may be in dehumidification mode, and the ambient temperature may be outside the recommended range of 5°C to 32°C.
Why is hot air coming out of the dehumidifier?
The dehumidifier cools the air as it extracts moisture, and the air is then reheated before being released. This process helps reduce energy consumption and speeds up dehumidification. The hot air is a normal byproduct and not a fault.
How do I empty the water tank?
To empty the water tank, gently remove it from the dehumidifier, open the tank cover, and pour out the water. Close the cover, rotate the handle down, and place the tank back into the dehumidifier. Always empty the tank before restarting the appliance.
How do I set the timer for the dehumidifier?
Press the TIMER button to adjust the time from 1 to 24 hours. Each press increases the setting by one hour. If the time exceeds 24 hours, it resets to 1 hour. The timer will automatically turn off the appliance after the set time. If no action is taken within 5 seconds, the setting is confirmed.
How do I use the drying function?
Press the DRYING button to start the drying process. The dehumidifier will run at high speed for 30 minutes, then switch to low speed for 15 minutes. To stop the process, press the DRYING button again or use the POWER button to return to standby mode.
How do I connect the dehumidifier to a drainage pipe?
Attach a drainage pipe with an inner diameter of 9 mm to the back of the dehumidifier. Ensure the pipe is securely connected and positioned so that its height does not exceed the water outlet. A smooth flow is essential to prevent water leakage.
How do I clean the air filter?
Regularly clean the washable PP air filter with cold or warm water. Avoid using chemical solvents or hot water. Ensure the filter is completely dry before reinstalling it to maintain optimal performance.
What should I do if the dehumidifier is making unusual noises?
Unusual noises may be caused by improper placement, blocked air filters, or loose drainage pipes. Ensure the dehumidifier is placed on a firm, level surface. Clean the air filter and check the drainage system for blockages. A slight 'tittering' sound is normal due to refrigerant flow.
How do I reset the dehumidifier after maintenance?
After cleaning or maintenance, ensure the power is disconnected before reassembling the unit. Once reconnected, the dehumidifier should resume normal operation. If the humidity indicator light is not functioning, check the settings and ensure the mode is correctly selected.