Abus FU8320W (76 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the battery type for the device?
The device is powered by a 3V lithium battery (CR2 type). It is important to use the correct battery type to ensure proper operation and safety.
How long does the battery last?
The battery life of the device is up to 36 months under normal conditions. Regularly check the battery status to avoid unexpected shutdowns.
How do I activate the LED?
To activate the LED, connect a jumper on LK1 and LK3. Then short-circuit LK4 with a jumper until the LED blinks continuously. Remove the jumper, and the LED is now active.
How do I deactivate the LED?
To deactivate the LED, connect a jumper on LK1. Then short-circuit LK4 with a jumper until the LED blinks continuously. Remove the jumper, and the LED is now deactivated.
What is the operating frequency of the device?
The device operates at a frequency of 868.6625 MHz. This frequency is optimized for reliable wireless communication with the alarm system.
Where should I install the detector?
Install the detector in the upper corner of the window or door frame. Ensure it is mounted on a flat surface to allow the wall contact to function properly.
What are the technical specifications of the device?
The device has a power consumption of 0.03A, weighs approximately 53g, and has dimensions of 33x89x29 mm. It is designed for use in environments ranging from -10°C to +55°C.
How do I program the zones?
To program the zones, ensure the receiver is in learning mode. Use the wireless universal module to position the detector's signal LED over the IR receiver and follow the instructions to learn the zones.
What is the maximum range of the device?
The range depends on environmental conditions. Test the device by mounting it temporarily with double-sided tape and triggering an alarm. If the signal is not received, try a different location and ensure the signal strength meets the required threshold.
What safety precautions should I follow?
Do not expose the battery to heat sources, direct sunlight, or high temperatures. Do not attempt to disassemble, puncture, or damage the battery. Keep it away from children and never use it in water. Always follow the installation instructions to ensure safe operation.