Log in


or


google Continue with Google

Already have an account?

Electrolux ESF66820 (100 pages)

0 out of 5
0 review

Tags

Loading...

Languages available:

No exact matches found. Please change your query

PDF page 1
Loading...
Need help?

Need help?

Do you have a question about the product that is not answered in the manual?

  • Receive updates on solutions
  • Get answers to your question

Ask a question

Select image (Optional)

Product description:

The Electrolux ESF66820 is a built-in dishwasher designed for efficient cleaning of dishes and kitchenware. It features a large capacity, allowing for the simultaneous washing of multiple place settings. The appliance includes multiple washing programs tailored to different types of dirt and dish materials. It is equipped with a water softening system to ensure optimal cleaning results even in areas with hard water. The dishwasher also offers energy-saving functions to reduce electricity and water consumption. Its modern design and user-friendly controls make it a practical addition to any contemporary kitchen.

Frequently Asked Questions

How to set the water softener?

To set the water softener, first determine the hardness of your water using the water hardness test. The water softener should be adjusted according to the hardness level in your area. For manual settings, open the machine door, remove the lower rack, set the water hardness dial to the appropriate level, and replace the rack. For electronic settings, press the power button to enter the setup mode, then hold the B and C function keys until the indicator lights start blinking, and use the A function key to select the desired level.

What type of salt should be used in the dishwasher?

Only use salt specifically designed for dishwashers. Other types of salt, such as table salt, can damage the water softener. Fill the salt reservoir with salt just before starting a full wash cycle to prevent corrosion and ensure optimal performance.

How to add rinse aid to the dishwasher?

To add rinse aid, open the rinse aid reservoir by pressing the release button. Pour the rinse aid into the reservoir until it reaches the 'max' level. Adjust the rinse aid dosage using the 6-level selector according to the desired results. The rinse aid is automatically dosed during the final rinse cycle.

What should I do if the dishwasher is not working properly?

If the dishwasher is not working properly, check the error codes displayed on the digital screen. These codes indicate specific issues with the appliance. Refer to the troubleshooting section in the manual for guidance on resolving common problems. If the issue persists, contact the service department for assistance.

How to load dishes into the dishwasher?

When loading dishes into the dishwasher, ensure that plates and cutlery do not block the spray arms' movement. Place hollow items like cups, glasses, and pans with the opening downward to prevent them from filling with water. Avoid stacking dishes or covering them. Keep glassware separate to prevent scratches. Place small items in the cutlery tray.

What items are not suitable for the dishwasher?

Items not suitable for the dishwasher include wooden, horn, porcelain, or bone-handled cutlery, non-heat-resistant plastic items, glazed designs, old glued dishes, silver and aluminum items (which may discolor), lead crystal glassware, easily rusting steel items, wooden plates, and synthetic fiber items. These items may be damaged or may not clean properly in the dishwasher.

How to use the Multi-tab function?

The Multi-tab function allows you to control the dosing of salt and rinse aid. To activate or deactivate it, use the function keys on the control panel. This function is particularly useful when using combined detergent blocks like '3 in 1' or '4 in 1'. Ensure the Multi-tab function is set correctly before starting a wash cycle.

How to cancel a running program?

To cancel a running program, press and hold the B and C function keys simultaneously until all the indicator lights on the program keys start blinking and the 'Program running' indicator turns on. The program will be canceled, and the machine will return to the setup mode.

How to adjust the rinse aid dosage?

To adjust the rinse aid dosage, use the 6-level selector on the rinse aid reservoir. Set the level according to the desired results. A lower setting is suitable for minimal residue, while a higher setting ensures better drying. The default setting is level 4, which provides a balanced rinse aid dosage.

Send answer

Your opinion matters to us

Do you think we can improve or add something? Are there features missing or do you have suggestions for improvement? We would love to hear from you.

Give a rating

5 out of 5