Hotpoint LFF 8314E (84 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I install the dishwasher?
To install the dishwasher, first remove all packaging and check for damage. Connect the water inlet hose to a cold or hot water source, ensuring the water pressure is within the specified range. Position the dishwasher on a level surface and adjust the feet as needed. Ensure the water and electricity supplies are connected by a qualified technician.
How do I connect the water inlet hose?
Connect the water inlet hose to a cold water source, ensuring the water is clear before attaching. For hot water, ensure the temperature does not exceed 60°C. Screw the hose tightly to the tap. If the hose is too short, contact a specialist or technician. The hose must not be bent or compressed.
How do I connect the water outlet hose?
Connect the water outlet hose to a drain duct with a minimum diameter of 4 cm. Ensure the hose is not bent. The outlet hose must be at a height of 40 to 80 cm from the floor. Before connecting, remove the plastic plug from the sink drain.
How do I adjust the dishwasher's height?
To adjust the height of the rear foot, use a hexagonal spanner (8 mm) to turn it clockwise to increase the height or counterclockwise to decrease it. This should be done on the central lower part of the dishwasher.
How do I measure the detergent?
Measure the detergent according to the wash cycle selected. For powder detergent, use compartments A and B. For tablets, place them in compartment A. Ensure the amount is correct to avoid overuse or underuse, which can affect cleaning performance.
How do I set the water hardness?
To set the water hardness, press and hold the P button until the desired level appears on the display. The water hardness setting helps optimize washing performance based on the water in your area. This information can be obtained from your water supplier.
How do I clean the filters?
Clean the filters regularly to ensure optimal performance. Remove the cylindrical filter, cup filter, and stainless steel plate filter, and clean them under running water. Inspect the trap for food residue and ensure the filters are reinstalled correctly.
How do I prevent unpleasant odors?
To prevent unpleasant odors, keep the dishwasher door slightly open after use to allow air circulation. Clean the door seals and detergent dispensers regularly with a damp sponge. Avoid food residue buildup, which is a common cause of bad odors.
How do I clean the sprayer arms?
Clean the sprayer arms periodically to prevent clogging. Use a small non-metallic brush to remove food residue. The sprayer arms can be removed by pressing the side tabs and pulling them up. Ensure the holes are facing upwards when replacing the upper arm.
How do I use the Good Night option?
To use the Good Night option, select the wash cycle and press the Good Night button. The corresponding indicator light will illuminate, and a short beep will confirm the selection. This option reduces noise and extends wash cycles, allowing you to benefit from night-time energy rates.