Pelgrim GVW486ONY/P02 (100 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to turn on the dishwasher?
To turn on the dishwasher, open the door and press the power button. The power indicator light will illuminate when the appliance is turned on. Select your desired program using the program button, and close the door for the dishwasher to start automatically.
How to delay the start time?
To delay the start time, use the delayed start button. You can choose a delay between 1 and 24 hours. The display will show the selected delayed start time, allowing you to schedule the dishwasher to start at a later time.
What is the 'Alt' function for?
The 'Alt' function allows you to select a separate wash program for the upper rack or the lower rack. This helps save water, energy, and shortens the wash cycle duration. It is ideal for washing dishes in one rack without affecting the other.
How to use the '3-in-1' program?
The '3-in-1' program uses special tablets that replace salt and rinse aid. These tablets are only compatible with the Intensive/Normale/Eco programs. Using them with other programs may affect the washing performance, so ensure you use them only with the designated program.
What to do after the wash cycle ends?
After the wash cycle ends, a sound signal will play for eight seconds. Turn off the dishwasher using the power button, then wait a few minutes before opening the door. Allow the dishes to cool slightly to prevent breakage and ensure better drying.
Can I open the dishwasher during operation?
No, you should not open the dishwasher during operation. Opening the door while the machine is running may expose you to hot water splashes. Wait until the cycle is complete and the door is fully closed before opening it.
What is the overflow protection feature?
The dishwasher has an overflow protection system that prevents excessive water from entering the appliance. It closes the inlet valve and pumps out excess water if needed. Before restarting the dishwasher, ensure any excess water is removed to avoid damage.
How to adjust a running wash program?
To adjust a running wash program, open the door and hold the program button for more than three seconds. You can then select a new program from the program table. Note that once the cycle has progressed, it may no longer be possible to adjust the program effectively.
What should I do if the dishwasher is leaking?
If the dishwasher is leaking, turn it off immediately and check for any damaged components. Ensure the water inlet and drain connections are secure. If the leak persists, contact a qualified technician to avoid further damage or electrical hazards.
How to clean the spray arms?
To clean the spray arms, remove them and use a soft brush to clear any blockages or debris. Ensure the spray arms are properly reattached and check for any damage. Regular cleaning helps maintain optimal water distribution and washing performance.
Related products from Pelgrim
GVW573ONY
User manual 40 pages
GVWC310L/P01
User manual 171 pages
gvw 945
User manual 58 pages
GVW221L/P01
User manual 64 pages
GVW301L/P01
User manual 64 pages
GVW380L
User manual 68 pages
GVW380XL
User manual 68 pages
GVW835E
User manual 83 pages
GVW537RVS/P01
User manual 85 pages
GVW537RVS/P04
User manual 85 pages
GVW537RVS/P05
User manual 85 pages
GVW537RVS/P06
User manual 85 pages
GVW537RVS/P07
User manual 85 pages
GVW552RVS/P01
User manual 85 pages
GVW537RVS/P03
User manual 85 pages
GVW552RVS/P05
User manual 85 pages
GVW552RVS/P06
User manual 85 pages
GVW552RVS/P07
User manual 85 pages
GVW552RVS/P03
User manual 85 pages
GVW552RVS/P04
User manual 85 pages