Dell PowerVault MD3000 (90 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I check my firmware version?
To determine if your firmware is first or second generation, connect to the system using Dell PowerVault MD Storage Manager, select the Support tab, and click Storage Array Profile. Note the firmware version: 06.xx.xx.xx indicates first generation, while 07.xx.xx.xx indicates second generation.
What should I do before upgrading firmware?
Before upgrading firmware, perform a complete data backup and use the Gather Support Information tool to save the system configuration. This ensures that you have a recovery point in case of any issues during the upgrade process.
What performance impact does second generation firmware have?
Upgrading to second generation firmware may cause a temporary performance impact due to a battery learn cycle. During this cycle, the system's write cache is disabled for about 15 hours, which may slow down certain file operations. After the cycle completes, the write cache is automatically re-enabled.
How long does the battery learn cycle take?
The first battery learn cycle after firmware upgrade takes approximately 15 hours to complete. Future learn cycles occur every 13 weeks and can be adjusted using the MD Storage Manager under Tools > Change Battery Settings.
How can I improve virtual disk copy performance on SATA disks?
To improve performance, create the virtual disk first and initialize it before starting the virtual disk copy operation. This helps reduce the time required for the copy process on SATA disks.
How do I configure load balancing in Windows Server 2008?
Load balancing in Windows Server 2008 is managed through the MPIO driver under the MPIO tab. Ensure the MPIO tab is configured correctly, and refer to the Installation Guide for detailed instructions on accessing and configuring these settings.
How do I install Linux on an MD3000 virtual disk?
During Linux installation, ensure you select the appropriate virtual disk mapped to the host. Avoid selecting Universal Xport disks for installation, as the array will not respond to such selections.
How do I expand a disk group or virtual disk?
You can expand a disk group or virtual disk using MD Storage Manager or the command line interface. For virtual disks, use the command 'set virtualDisk [VDname] addCapacity=sizetobeadded' to add capacity. Ensure redundancy is maintained during the expansion process.
How do I assign LUNs to Windows 2008 Server?
To assign LUNs to Windows 2008 Server, disable SAS 5/i ports in the Storage Manager for SANs utility. This prevents issues with assigning virtual disks. Ensure SAS 5/e ports remain enabled and follow the steps for managing server connections.
How do I reset the array password on Windows Server 2008?
To reset the array password, use a terminal application capable of COM port connections. Configure the application with the communication settings from the User’s Guide and follow the password reset procedure described in the guide to ensure full functionality.
Related products from Dell
PowerVault DL2200
User manual 2 pages
PowerVault DL2200
User manual 124 pages
PowerVault DL2100
User manual 2 pages
PowerVault DL2100
User manual 2 pages
PowerVault DL2100
User manual 126 pages
PowerVault MD3260i
User manual 2 pages
PowerEdge R310
User manual 2 pages
PowerVault MD3260
User manual 2 pages
PowerVault MD3660f
User manual 2 pages
DX6000G
User manual 2 pages
PowerVault MD3660i
User manual 2 pages
PowerVault NX300
User manual 2 pages
PowerVault NX300
User manual 124 pages
PowerVault 220S
User manual 72 pages
PowerVault 220S
User manual 110 pages
POWERVAULT MD3620F
User manual 94 pages
POWERVAULT MD3620F
User manual 222 pages
PowerVault MD3000i
User manual 144 pages
PowerVault MD3000i
User manual 324 pages
PowerVault MD3200
User manual 174 pages