Sun Microsystems GDM-20E20 (68 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I reset the adjustment data to factory-preset levels?
To reset all adjustment settings to their original state, press and hold the RESET button for more than two seconds. This action will restore brightness, contrast, size, centering, pincushion, convergence, color temperature, and other parameters to their default values.
What are the power-saving modes of this monitor?
The Power Saving Function reduces energy consumption when no signal is detected. The unit enters Normal Standby mode (approx 70% power), Suspend Active-off mode (approx 10%), or fully off state depending on sync signals. Indicators change accordingly, and the display waits for input.
How do I adjust picture brightness?
Use the ¨ ./> buttons to control brightness levels. Pressing these adjusts both overall brightness settings and individual items displayed in On Screen Display (OSD). The OSD disappears after 3 seconds if no further adjustments are made.
What is the recommended power supply for this monitor?
For USA/Canada, use a UL LISTED/CSA LABELLED cord with Nema-Plug 5-15p type. The cable should be SVT or SJT rated at minimum 3 × 18 AWG and up to 15 feet long for proper operation.
How do I adjust the color temperature?
Press the (option) button, then use > ?// buttons to select from three modes: 5000K, 6500K, or 9300K. Adjust individual colors by pressing ¨ ./> for red and blue settings until desired color balance is achieved.
What are the supported resolutions and frequencies?
The monitor supports two modes: Mode 1 with resolution of 1280 × 1024 at horizontal frequency 81.1 kHz and vertical frequency 76 Hz; and Mode 2 with 1152 × 900 at 71.8 kHz horizontal and 76 Hz vertical frequencies.
How do I adjust the picture size?
Press the Å button to access On Screen Display (OSD) for adjusting both vertical and horizontal image scaling. Use > ?// buttons to increase or decrease dimensions until desired settings are reached.
What safety precautions should be taken when installing this monitor?
Avoid placing the unit near heat sources, direct sunlight, dust, vibrations, or magnetic fields like high voltage lines and converters. Ensure proper ventilation by not blocking air vents with rugs, blankets, or curtains.
How do I lock control buttons to prevent unauthorized access?
Press the (option) button then select 'Lock' mode using > ?// buttons. This disables all front panel controls except power switch. To unlock, set it back to off position or press any button which will trigger a visual indicator on screen.
What are the environmental compliance standards for this monitor?
This product complies with Swedish National Council for Metrology (MPR II) and European EMV directives. It also meets Energy Star guidelines, allowing it to enter low-power states when inactive while using compatible frame buffers and software.