Ferm FDSD-1800K2 (68 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum torque of the drill?
The maximum torque at low speed is between 7-9 Nm, ensuring efficient drilling and screw driving without overloading the tool.
How long does it take to charge the battery?
It takes approximately 1-2 hours to fully charge the battery. Ensure that charging occurs in a dry environment between temperatures of 5°C and 40°C.
What are the drill speeds available?
The tool has two speed settings: position I for slow drilling or screw driving, and position II for fast drilling. Always ensure that you do not switch speeds while the motor is running.
How to adjust the pivot lock knob?
To unlock the head's swing movement, turn the pivot lock knob counterclockwise until it stops. Adjust the pivoting angle in 5 different positions (0/22.5/45/67.5/90 degrees). To lock again, rotate the knob clockwise when the head is correctly positioned.
What should I do if the battery becomes fully discharged?
If the battery becomes completely discharged, a polarity switch effect may occur where the positive and negative poles reverse. Once this happens, it can damage the battery irreparably. Always charge the battery before use to avoid this issue.
How do I replace or remove bits?
To insert or remove bits, place them directly into the bit holder or on the extension bit holder. The extension bit holder is useful for hard-to-reach screws. Use the bit holder selection knob to switch between two different screw bits quickly.
What safety precautions should I take with the charger?
Never attempt to repair the charger or battery block yourself; always use an authorized dealer. Ensure that all cables are connected correctly before using the charger, and never expose it to water or rain. Always unplug the charger when not in use.
How do I charge the battery?
Place the fully discharged battery into the charger as shown in the diagram, ensuring that you align the + and - poles correctly. Insert the charger plug into a power socket. The red rapid charging lamp will illuminate when charging begins, and the green trickle charging lamp indicates completion.
What is the weight of the tool without battery?
The tool weighs 1.2 kg without the battery, making it lightweight for easy handling during drilling or screw driving tasks.
How to prevent overheating of the motor?
Keep the ventilation slots clean and free from dust by regularly cleaning with a soft cloth. Avoid placing the tool on dusty surfaces as this may cause particles to enter the mechanism, leading to overheating or malfunction.
Related products from Ferm
FPD-13/650
User manual 14 pages
CDM1003
User manual 30 pages
TDM1012
User manual 30 pages
FTB-13
User manual 44 pages
PDM1015
User manual 36 pages
TDM1022
User manual 40 pages
TDM1001
User manual 44 pages
FDCD-1800K2
User manual 48 pages
FDCD-1440K2
User manual 48 pages
FDCD-1440K2
User manual 48 pages
TDM1025
User manual 52 pages
HDM1007
User manual 52 pages
CDM1079
User manual 56 pages
CDM1093
User manual 56 pages
FDCD-1440LKN
User manual 56 pages
FDCD-1800NL
User manual 60 pages
CDM1076
User manual 64 pages
FPCD-1800LK
User manual 64 pages
FPCD-1800
User manual 64 pages
CDM1077
User manual 68 pages