Parkside PSBM 850 (75 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to attach the auxiliary handle?
Before using the tool, ensure the auxiliary handle is securely attached. Place the handle on the spindle collar and position it as needed. Tighten it in place. If required, also install the depth stop.
How to insert a tool into the chuck?
Always switch off the device and unplug it before inserting a tool. Locate the chuck and carefully place the tool inside. Ensure the tool is properly seated and secured.
How to open the chuck?
The chuck can be opened by turning it when the motor has stopped. The quick-release chuck allows for easy tool changes without the need for a special key.
How to tighten the chuck?
After inserting the tool, use the chuck to secure it in place. Ensure the tool is tightly fastened to prevent it from loosening during operation.
How to switch on and off the drill?
To turn the drill on, press the ON / OFF switch. To turn it off, release the switch. The drill can be operated in either intermittent or continuous mode depending on the task.
How to select the direction of rotation?
To change the rotation direction, ensure the device has completely stopped. Then, use the rotation direction switch to set the desired direction of rotation.
How to select the gear?
To switch between gears, ensure the device has stopped. Use the gear selector switch to choose between low and high speed ranges. Continuous operation mode requires holding the lock switch while pressing the ON / OFF switch.
How to adjust the speed setting?
The ON / OFF switch allows for infinitely adjustable speed settings. Pressing the switch increases the speed. Adjust the speed based on the material being drilled to ensure optimal performance.
How to switch between drilling and hammer-action?
To switch between drilling and hammer-action, ensure the device has stopped. Use the drill / hammer-action switch to select the desired mode. Hammer-action is suitable for drilling into brick, concrete, and stone.
How to dispose of the device?
Do not dispose of the device with household waste. Instead, contact your local recycling center for proper disposal. Electrical power tools should be collected separately for environmentally compatible recycling.