Protool PDC 18-4 TEC Li (100 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum torque for the PDC 12-4 TEC Li?
The maximum torque for the PDC 12-4 TEC Li is 40/60 Nm, which can be adjusted according to the settings. This torque rating is suitable for both soft and hard screw applications.
What is the maximum drilling diameter for the PDC 12-4 TEC Li?
The PDC 12-4 TEC Li can drill up to a maximum diameter of 50 mm in wood and 12 mm in metal. These values are based on the tool's specifications and are suitable for various materials.
How long does it take to charge the BP 18 Li Ion battery?
The BP 18 Li Ion battery takes approximately 55 to 70 minutes to charge fully when using the BCL 3 charger. This time may vary depending on the battery's current state of charge.
What is the operating temperature range for the PDC 12-4 TEC Li?
The PDC 12-4 TEC Li operates within a temperature range of -5°C to +45°C. The device is equipped with an NTC resistor to monitor and maintain safe operating conditions.
How do you change the direction of rotation on the PDC 12-4 TEC Li?
To change the direction of rotation, use the switch located at [1-9]. Moving the switch to the left sets the direction to clockwise, while moving it to the right sets it to counterclockwise.
What is the weight of the PDC 12-4 TEC Li without the battery pack?
The PDC 12-4 TEC Li weighs 2 kg without the battery pack. This weight is important for assessing the tool's portability and ease of use during operation.
How do you adjust the torque setting on the PDC 12-4 TEC Li?
To adjust the torque setting, use the dial located at [1-8]. The torque can be set between 1 (low) and 12 (high), with the signal tone indicating when the set torque is reached.
What is the maximum depth setting for the depth stop on the PDC 12-4 TEC Li?
The depth stop on the PDC 12-4 TEC Li allows for a maximum depth setting of 0.1 mm increments. This feature helps in precisely controlling the depth of screw insertion.
What is the purpose of the LED on the PDC 12-4 TEC Li?
The LED on the PDC 12-4 TEC Li serves as both a work light and an indicator for the battery's charge level. It provides visual feedback on the battery's state of charge and the tool's operational status.
What should you do before using the PDC 12-4 TEC Li for the first time?
Before using the PDC 12-4 TEC Li for the first time, apply a small amount of multi-purpose grease to the spindle and gear housing. This ensures smooth operation and reduces wear during initial use.
Related products from Protool
DRP 13-2 EAQ
User manual 73 pages
DRP 13-2 EAQ
User manual 68 pages
DRP 13-2 EQ
User manual 68 pages
DRP 13-2 EQ
User manual 73 pages
DRP 32-4
User manual 56 pages
DRP 32-4
User manual 68 pages
PDP 20-2EAQ
User manual 92 pages
PDP 20-2EAQ
User manual 73 pages
PDP 20-2EAQ
User manual 68 pages
PDP 32-2EQ
User manual 84 pages
PDP 20-4 DEC FF
User manual 87 pages
DRP 18-4 DEC FF
User manual 87 pages
IWC 18-2 TEC
User manual 120 pages
PDP 24-2 EAQ
User manual 96 pages
PDC 12-4 TEC Li
User manual 100 pages
PDC 12-4 TEC Li
User manual 100 pages
IDC 15-2 TEC
User manual 120 pages