Masterflex B/T 7585-40 (35 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How does the Masterflex B/T 7585-40 peristaltic pump operate?
The Masterflex B/T 7585-40 uses rotating rollers or shoes to compress flexible tubing and create a sealed fluid pocket that is pushed forward. This dry-running principle keeps the pump internals isolated from the fluid, reducing contamination risk and simplifying cleaning. For best results, choose compatible tubing and avoid excessive backpressure to maintain smooth operation.
What flow rate range can the B/T 7585-40 achieve and how is it adjusted?
Flow is adjusted by changing the pump speed and tubing internal diameter; both factors determine delivered volume. Using a lower speed and smaller tubing reduces flow for slow dosing, while higher speed and larger tubing increase throughput. Calibrate the specific combination in your system to ensure repeatable performance and record settings for consistent results.
Which types of fluids is the pump suitable for, including corrosive or abrasive media?
Because the pumped media contacts only the tubing, the B/T 7585-40 is suitable for many corrosive and abrasive fluids when the correct tubing material is selected. Aggressive chemistries require chemically resistant tubing, while slurries need abrasion-resistant compounds. Always verify chemical compatibility and consider particulate size to avoid premature tubing wear.
How accurate and repeatable is dosing with this peristaltic pump?
Peristaltic pumps provide very good repeatability and volumetric accuracy when tubing wear, speed stability, and backpressure are controlled. Accuracy depends on tubing elasticity and condition, so routine calibration and timely tubing replacement help maintain tight dosing tolerances. For critical applications, perform regular in-situ verifications and use closed-loop control if available.
How do I select the correct tubing material and size for my application?
Select tubing based on chemical compatibility, operating temperature, required flow, pressure and particulate content. Materials such as silicone, Viton, or polyurethane have different resistance and mechanical properties. Choose an internal diameter that meets your flow requirements and an outer wall robust enough for your pressure. Test candidate tubing under actual conditions before full deployment.
What routine maintenance is required to ensure reliable operation?
Routine maintenance includes inspecting and replacing worn tubing, checking the rotor and rollers for wear, cleaning the pump head, and verifying drive belts or motor condition. Keep a log of operating hours and replacement intervals to predict service needs. Regular checks prevent unexpected downtime and preserve dosing accuracy and pump longevity.
Can the B/T 7585-40 be integrated into automated process control systems?
Yes, the pump can be integrated into automated systems by using available speed control or external control signals where supported. Integration options include analog speed inputs, relay control or interfacing through a programmable controller. Confirm the specific model's control interfaces and use appropriate isolation and signal conditioning when connecting to PLCs or other automation hardware.
How is tubing replaced and how often should tubing be changed?
To replace tubing, stop the pump, relieve pressure, open the pump head, remove the old tubing, fit the new tubing into the rotor channel and reassemble. Frequency of replacement depends on fluid abrasiveness, chemical attack and operating hours; high-wear applications may require frequent changes, whereas gentle fluids allow longer intervals. Keep spare tubing and track lifecycle data to plan replacements proactively.
Is this pump suitable for food and pharmaceutical applications and how can I ensure compliance?
The pump design is well suited to hygienic applications because the fluid contacts only the tubing. To ensure food or pharmaceutical compliance, use tubing certified for food or drug contact (e.g., FDA- or USP-grade), follow validated cleaning and sterilization procedures, and maintain traceability of materials and maintenance records for audits and quality systems.
What safety features and installation considerations should I keep in mind?
When installing the pump, ensure secure mounting, proper grounding and appropriate electrical supply, plus ventilation to avoid motor overheating. Provide guarding around moving parts, implement overpressure protection on the fluid side and use drip containment for potential leaks. Train operators on safe handling of hazardous fluids and establish lockout/tagout procedures for maintenance.