ACME Payload (100 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum flight time of the drone?
The drone has a maximum flight time of up to 10 minutes. This is based on the battery capacity and the operating conditions. Ensure the battery is fully charged before each flight to maximize performance.
How do I charge the drone battery?
To charge the drone battery, first turn off the drone and unplug the battery cable from the power wire plug. Insert the charger into a power outlet, and connect the battery cable to the charger. The indicator light will turn red during charging and green when fully charged. Full charging takes approximately 2.5 hours.
What are the safety precautions for battery use?
Always store and use the battery in a cool, dry environment. Keep it away from children and fire sources. Do not connect the battery directly to a wall socket or vehicle socket. Avoid short circuits by ensuring the battery terminals are not touching. If the battery shows signs of overheating, deformation, or unusual smells, stop using it immediately.
How do I switch between flight modes?
To switch between flight modes, press the flight mode button on the remote controller. This allows you to toggle between low speed and high speed modes. Ensure the drone is stable and in a safe location before changing modes.
What is headless mode and how do I activate it?
Headless mode allows the drone to fly without needing to orient itself relative to the remote controller. To activate it, press the function button on the remote controller for about 2 seconds. The remote will emit two beeps, and the drone’s indicator light will change from constant to flashing, indicating headless mode is active.
How do I calibrate the drone in headless mode?
To calibrate the drone in headless mode, position it so its front is facing you, then turn both control sticks to the lower right corner for about 2 seconds. The drone’s indicator light will change from slow flashing to rapid flashing, indicating the calibration is complete.
What should I do if the drone is shaking during flight?
If the drone is shaking during flight, it may be due to an unbalanced propeller or incorrect calibration. Check the propellers for damage and replace them if necessary. Also, recalibrate the drone and remote controller by placing the drone on a flat surface and moving the control sticks to the bottom right for 3 seconds.
How do I perform a 3D flip?
To perform a 3D flip, press the 3D rolling button and push the right control stick to the top, bottom, leftmost, or rightmost position simultaneously. The drone will execute the flip based on the control signal from the remote controller. Ensure the drone is in a safe and open area before attempting this maneuver.
What should I do if the drone is flying in the wrong direction?
If the drone is flying in the wrong direction, it may be due to incorrect calibration or orientation. Ensure the drone is set with its nose facing forward and tail facing the pilot. Recalibrate the drone by placing it on a flat surface and moving the control sticks to the lower right corner for 3 seconds. This will reset the orientation settings.
How do I ensure the drone is properly balanced?
To ensure the drone is properly balanced, adjust the trimmer settings on the remote controller. Set the trimmers to the midpoint and fine-tune them as needed. This helps maintain stability during flight and prevents unintended movements.