AC Hydraulic GGD150F (28 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum capacity of GGD150 series jacks?
The GGD150F, GGD150S, and GGD150U models all have a maximum lifting capacity of 15 tons. Ensure that you never exceed this limit to avoid damage or safety risks.
How do I connect the air supply for these jacks?
Connect the compressed air supply on the left side using a ¼” WRG connection with pressure ranging from 8.5–12 bar (350 l/min; 13 cfm/min). Always use filtered and lubricated air to ensure proper operation.
What safety precautions should I follow when operating these jacks?
Only trained personnel may operate the jack, ensuring that no one is in danger. Never exceed capacity, avoid overloading, secure vehicles properly before lifting, and always use approved support stands or bridges under lifted equipment.
How do I lift a vehicle using this hydraulic floor-based pit jack?
Ensure the vehicle can roll freely during operation (brakes off, in neutral). Activate the pedal for pneumatic quick approach until the lifting saddle is close to the specified lifting point. Position and secure the jack exactly on the manufacturer's designated lifting points.
What should I do if the jack does not lift fully?
If the jack fails to reach maximum height, check that there is sufficient hydraulic oil in the reservoir. Refill through the side filling plug as needed and ensure no water has mixed with the oil.
How often should maintenance be performed on these jacks?
Daily inspections are required for damage checks, filter cleaning, and lubrication of moving parts. Monthly maintenance includes checking for hydraulic leaks, verifying oil levels, and inspecting safety labels to ensure they remain legible.
What type of oil should be used in the jack's reservoir?
Use any good quality hydraulic oil with ISO VG 15 viscosity. Never use brake fluid as it can damage internal components and compromise performance.
How do I bleed air from the hydraulic system after repairs?
After repair, fully extend the cylinder to its maximum stroke, loosen screw 0230100 in the top flange, then pump until clean oil flows. For manual pumps, repeat this process by loosening both screws and pumping with the pedal.
How do I secure engines or gearboxes during transport?
Before moving any engine or gearbox components, ensure they are fully lowered and secured using straps or chains. Transport must occur in the lowest position to prevent movement or damage.
What should be done with used hydraulic oil after equipment destruction?
Used hydraulic oil must be drained off and disposed of according to environmental regulations. Ensure proper handling and disposal methods are followed to avoid contamination or harm to the environment.