Auping Basic (76 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to adjust the head section?
To adjust the head section, pull the adjustment cord to bring the upper body forward. The head section will rise automatically. Release the cord once the desired position is reached. For lowering, pull the cord and lean back, then release when the desired position is achieved.
How to adjust the foot end?
The foot end has six adjustment positions. Gently pull the handle until the desired position is reached. To lower the foot end, first pull it fully up and then let it drop slowly to the lower position.
How to change the gas spring tension?
The gas spring tension can be adjusted to three levels: light, normal, or heavy. For light, use the top hole; for normal, use the middle hole; for heavy, use the bottom hole. To adjust, push the connecting pin through the gas spring and the eyelet, then tighten the plastic nut.
How to move the control knob to the left side?
The control knob is located on the right side but can be easily moved to the left. Remove the plastic nut, support the head section, and pull out the connecting pin. Place the gas spring eyelet in the desired position and reattach the knob.
How to install the mattress?
Place the mattress in the center of the spiral base. Ensure the five feet of the fasteners are aligned with the width direction of the frame. Secure the mattress by clicking the fasteners into place as shown in the diagram. Make sure the mattress is firmly attached to the base.
What safety precautions should I take?
The adjustable base is not suitable for children. Keep children away from the bed and ensure no children are underneath during adjustment. The base contains moving parts that may cause pinching, so exercise caution when adjusting. Avoid using the base in wet areas.
What should I do if there are unusual noises?
Unwanted noises like creaking or squeaking are often caused by moving parts rubbing together. Check if any parts are loose, not properly secured, or if foreign objects are inside the bed. Ensure the bed is level and not touching the wall. If the gas spring fails unexpectedly, the control cord will tighten, and the head section will rise automatically.
How to secure the base properly?
Ensure the base can move freely and is properly attached to the mattress. The base should be in a flat position and mounted on the support feet. Check that the fasteners are securely clicked into place and that the base is stable and level.
How to maintain the base?
Regularly check that all parts are securely fastened and that the base moves smoothly. Avoid placing sharp or heavy objects inside the bed. Clean the base with a damp cloth and mild detergent. If stains appear, use a stain remover suitable for the material.
What is the warranty for this product?
This product is covered by the warranty terms of Koninklijke Auping bv. The warranty covers manufacturing defects and ensures the product meets the current CE directives. For details, refer to the warranty section in the manual.