cherubini MODO RX (88 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to install the motor on the tube?
To install the motor on the tube, first insert the adapter onto the gear by aligning the groove with the reference notch and push until it stops. Then mount the drive pulley on the motor shaft until the stop spring clicks. Finally, fully insert the motor into the winding tube. Note: For round tubes, the drive pulley must be fixed to the tube, which is the installer's responsibility. For other tube profiles, fixing is optional but strongly recommended.
What are the electrical connections for the motor?
The electrical connections must be made according to the motor's electrical characteristics. Use a cable with H05RN-F designation containing at least 2% carbon. If the white wire is not used, it must always be insulated. It is dangerous to touch the white wire when the motor is powered. The white wire can be connected to either the live (brown) or neutral (blue) wire.
How to program the motor with the remote control?
To program the motor, use the remote control's specific sequences. Most commands consist of three distinct steps. After each step, the motor signals whether the step was completed successfully or not through different rotation types. Press the buttons as indicated in the sequence, ensuring no more than 4 seconds pass between steps. If more than 4 seconds pass, the command is not accepted, and the sequence must be repeated.
How to enable motor programming mode?
To enable programming mode, press and hold the A, B, and C buttons simultaneously for 3 seconds. Alternatively, remove and reinsert a battery to reset the timer. Once enabled, follow the instructions in the manual to proceed with programming.
How to disable motor programming mode?
To disable programming mode, press and hold the A, B, and C buttons simultaneously for 3 seconds. Alternatively, remove and reinsert a battery to reset the timer. This will prevent accidental modifications to the motor's programming during normal use.
How to store the first remote control?
To store the first remote control, ensure the motor is new or has had its memory completely erased. Press and hold the A and B buttons, then press B again. The motor will store the remote control. This process must be done one motor at a time.
How long is the programming window for the first remote control?
After turning on the motor, you have 3 hours to store the first remote control. If this time passes, the ability to store the remote control is disabled. To reset the timer, simply remove and reapply power to the motor.
How to adjust the limit switches?
The motor has an electronic limit switch system with an encoder, ensuring high reliability and precision. To adjust the limit switches, use the remote control. Press and hold the up or down button to move the motor until the desired position is reached. The motor will stop when you release the button. A short press of the up or down button will move the motor from the stored position.
How to set the intermediate position?
To set the intermediate position, use the remote control to move the motor to the desired location. Once in position, press and hold the up or down button to store the intermediate position. This allows the motor to stop at a specific point during operation.
How to cancel the intermediate position?
To cancel the intermediate position, use the remote control to move the motor away from the stored intermediate position. Once moved, press and hold the up or down button to erase the intermediate position. This will reset the motor to its default behavior without the intermediate stop.