Solo 142 (378 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to start the engine?
To start the engine, ensure the choke lever is in the 'Choke' position. Pull the starter rope until the engine starts. Once running, move the choke lever to the 'Run' position. Make sure the fuel tank is filled with the correct fuel mixture.
What is the maximum engine speed?
The maximum engine speed is 11,200 revolutions per minute (U/min). This speed is achieved when the engine is under full load and operating at optimal conditions.
What type of fuel should be used?
The engine requires a two-stroke fuel mixture with a 20:1 ratio of gasoline to two-stroke oil. Always use the recommended oil type and mix it thoroughly before filling the fuel tank.
How to maintain the blade?
Regularly inspect the blade for damage or dullness. Sharpen the blade using a file or professional sharpening tool. Ensure the blade is securely fastened and free from debris. Clean the blade after each use to prevent rust and corrosion.
What safety equipment is required?
Wear safety goggles, a helmet, and ear protection when operating the machine. Use long pants, sturdy shoes, and gloves. Ensure that the blade is fully covered when transporting or storing the machine.
What is the noise level of the machine?
The machine produces a sound pressure level of 92 dB(A) and a sound power level of 105 dB(A). These levels are measured under standard operating conditions and may vary depending on the environment.
How to check for blade damage?
Before each use, visually inspect the blade for cracks, bends, or signs of wear. If any damage is found, replace the blade immediately to avoid injury or equipment failure.
What is the weight of the machine?
The machine weighs 8.3 kg without fuel. This weight is important for handling and maneuverability, especially when working in tight spaces or on uneven terrain.
How to store the machine properly?
After use, turn off the engine and allow the blade to stop completely. Clean the machine and store it in a dry, secure location. Ensure the fuel tank is empty or filled with a fuel stabilizer to prevent degradation.
What is the blade cutting width?
The blade has a cutting width of 25 cm, which is suitable for trimming and mowing small areas of grass. This width allows for efficient coverage while maintaining control over the machine.