Kärcher DS 2 (116 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to install the device?
To install the device, first attach the safety valve HD to the water inlet. Ensure the flow direction is correct and the installation is vertical. Mark three holes on the wall for mounting, drill them, insert the dowels, and secure the device with screws. Position the foot valve at least 1 meter below the safety valve.
How to connect the water supply?
Connect the water supply hose to the safety valve HD. Ensure the hose has an inner diameter of at least 13 mm and a 3/4" threaded fitting. The water pressure must be at least 0.17 MPa (1.7 bar). Hang the front part of the casing into the rear part and lock it in place.
How to select the mixing ratio?
Choose the appropriate nozzle insert based on the desired mixing ratio. The nozzle color indicates the ratio, such as grey for 3:1 or black for 3.5:1. Slide the nozzle insert fully into the detergent input and secure it properly.
What is the water inlet pressure requirement?
The water inlet pressure must be at least 0.17 MPa (1.7 bar) to ensure proper operation. If the pressure is too high, install a pressure limiter in the water inlet, up to a maximum of 0.42 MPa (4.2 bar).
How to prime the device before use?
To prime the device, briefly press the operating button to release any trapped air. Ensure the water supply is open and the device is properly installed. Check that all connections are secure and the system is ready for operation.
How to maintain the device?
Regularly check the foot valve for deposits and clean it with clear water. If limescale is present, descale the device. Inspect the detergent suction hose for holes and ensure it is fully secured on the hose fitting to prevent air leaks.
What to do if no detergent solution is dispensed?
If no detergent solution is dispensed, check that the water inlet is open and the sieve in the water connection is clean. Ensure the water pressure is at least 0.17 MPa (1.7 bar). If the device is blocked, clean and descale it.
What to do if too much detergent is mixed?
If too much detergent is mixed, check that the correct nozzle insert is installed. If the operating button is set for continuous operation, pull it out to stop the flow. Ensure the water pressure is not too high and the system is properly sealed.
What to do if the detergent solution foams?
If the detergent solution foams, check the water supply for contamination and ensure the water pressure is within the recommended range. Clean the water valve and check for any air leaks in the system. Ensure the detergent suction hose is fully secured.
How to handle a faulty foot valve?
If the foot valve is faulty, clean it thoroughly with clear water. If deposits or limescale are present, descale the valve. Ensure the valve is properly positioned and secured to prevent leaks or blockages.
Related products from Kärcher
NT 351 ECO
User manual 38 pages
T 7/1
User manual 144 pages
WV 5 Plus N
User manual 14 pages
MV 5 P Premium
User manual 260 pages
NT 50/1 Ap L
User manual 176 pages
NT 50/1 Ap L
User manual 203 pages
NT 50/1 Ap L
User manual 256 pages
SC3 Upright EasyFix
User manual 17 pages
NT 14/1 Ap Te Adv L
User manual 200 pages
NT 14/1 Ap Te Adv L
User manual 248 pages
Puzzi 400 E
User manual 172 pages
Puzzi 400 K
User manual 21 pages
NT 65/2 Eco
User manual 176 pages
WD 2 Premium
User manual 126 pages
1.355
User manual 32 pages
A 1001
User manual 51 pages
NT 361 Eco BS
User manual 56 pages
NT 611 Eco BS
User manual 56 pages
2601 plus
User manual 57 pages
4001
User manual 63 pages