Bestway 58404 (132 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What safety precautions should be taken when installing the sand filter?
Ensure the sand filter is placed on solid, level ground at least 2 meters away from the pool. Keep the power source at least 4 meters away from the pool and 1.2 meters high. Always use an earthed power source and avoid using extension cords.
How should the sand filter be connected to the power supply?
The sand filter must be connected to an earthed power source. Use an isolating transformer or a residual current device (RCD) with a rated residual operating current not exceeding 30 mA. Never modify the plug or use an adaptor.
What should be done if the power cord is damaged?
Replace the damaged cord immediately. Only use a replacement cord provided by the manufacturer, its service agent, or a similarly qualified person to avoid electric shock hazards.
Can the sand filter be used with a permanently-installed pool?
No, the sand filter is only for use with storable pools. A storable pool can be disassembled for storage and reassembled, while a permanently-installed pool is fixed in place and cannot be easily dismantled.
What is the recommended operating pressure for the sand filter?
The working sand filter pressure should be less than 0.45Bar (6.5PSI). The maximum operating pressure is 0.83Bar (12PSI). Monitor the pressure gauge regularly to ensure it remains within safe limits.
How often should the sand filter be cleaned?
Clean the sand filter once a month or more frequently if the pool is used often. Regularly check the filter clogging level and perform backwashing or rinsing as needed to maintain optimal performance.
What should be done before cleaning or maintaining the sand filter?
Always unplug the sand filter from the electrical outlet before removing, cleaning, servicing, or making any adjustments. Ensure the sand filter is switched off and unplugged to avoid electric shock risks.
How do you perform the backwashing and rinsing process?
Press the control valve handle to the backwash function, run the sand filter for 3-5 minutes until the water runs clear. Then switch to the rinse function for 1 minute to circulate water backwards and drain through port D. Finally, set the control valve to the closed function.
What should be done if the sand filter is leaking from port D?
Ensure the control valve is set to a single function and not between two positions. Check for a broken gasket and replace it if necessary. Also, make sure the port D cap is securely screwed on before operating the sand filter.
What are the warranty terms for the sand filter?
The product comes with a limited warranty covering manufacturing defects discovered during unpacking or use as recommended in the manual. The warranty does not cover damage caused by misuse, neglect, or improper installation. Contact Bestway’s service department for warranty claims.