BWT R1 (27 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How often should backwashing be performed?
Backwashing must be carried out every six months to prevent the buildup of foreign particles on the filter mesh. In cases of heavy contamination, more frequent cleaning may be necessary.
What is the purpose of these filters?
These filters are designed for filtering drinking and process water. They protect against malfunctions and corrosion in piping systems caused by foreign particles such as rust, swarf, sand, and hemp.
How does backwashing work?
Backwashing is performed manually using the principle of suction-based cleaning (suction power backwashing system). The filtration process continues uninterrupted during backwashing since approximately 90% of the filter area remains available for operation, ensuring non-stop filtration.
What are the installation conditions?
Installation must comply with local regulations and technical data. A minimum flushing volume of 3.5 m³ per hour or a pressure of at least 2 bar is required during backwashing downstream of the filter. A wastewater connection (drain) of at least DN 50 should be available.
How do I install the filter?
Install the filter in cold water pipes upstream of protected equipment, ensuring shut-off valves are installed both before and after the filter. Mount the connection module horizontally or vertically according to flow direction (note the arrow on the head). Connect the rinsing water with a hose to the drain or provide a collection vessel.
What is the recommended maintenance schedule?
Regular maintenance must be performed by qualified personnel as per DIN EN 806-5. Replace worn parts at specified intervals: sealing elements every three years, filter element every six years, and transparent inspection cylinder every fifteen years.
What are the technical specifications for BWT R1?
BWT R1 filters have nominal connection sizes of DN 20 to 32. Flow rates at Δp = 0.2 bar RF range from 3 m³/h to 4 m³/h, and flow rates at Δp = 0.5 bar RF are between 5.0 m³/h and 6.0 m³/h. The operating pressure ranges from 2.5 bars during backwashing up to a maximum of 16 bars.
How do I adjust the outlet pressure?
Adjust the outlet pressure using the clamping screw (9) and rotary knob (10). Turning clockwise increases back pressure, while turning counterclockwise decreases it. The adjustment range is 1.5 to 6 bar.
What should I do if there's a fault?
If the filter element becomes dirty or water pressure drops significantly during use, perform backwashing. If the rinsing outlet cannot be closed due to blockage by coarse particles, fully open and repeat backwashing several times. For high-pressure issues caused by worn seals, adjust the back pressure as described in commissioning.
What are the warranty conditions?
During the warranty period, contact your contractor or BWT customer services with details of the device type and production number if a fault occurs. The manufacturer guarantees proper operation under correct installation and maintenance procedures.
Related products from BWT
Penguin 2,7 L
User manual 3 pages
Penguin 2,7 L
User manual 96 pages
Vida 2,6 L
User manual 3 pages
Vida 2,6 L
User manual 96 pages
Aqualizer 2.6 L
User manual 3 pages
Siljan 3.3 L
User manual 3 pages
Slim 3.6 L
User manual 3 pages
B-SAFE universal
User manual 16 pages
Multipur 65 M
User manual 20 pages
Infinity AP
User manual 58 pages
Infinity AP
User manual 60 pages
Infinity AP
User manual 100 pages
Infinity A
User manual 58 pages
Infinity A
User manual 60 pages
Infinity A
User manual 100 pages
RTM CT
User manual 36 pages
Avanti WF
User manual 36 pages
Quick & Clean
User manual 48 pages
Slim 3
User manual 96 pages
ROBUST 1500
User manual 108 pages