ABB ProcessMaster (704 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What are the technical limits for the device?
The device is intended for use only within the technical limits specified on the nameplate and in the data sheets. These limits include the allowable operating pressure (PS) and allowable fluid temperature (TS), which must not exceed the pressure-temperature ratings (p/T-Ratings). The maximum operating temperature must not be exceeded, and the allowable ambient temperature must not be exceeded. The device's housing protection class must be observed during operation. The measuring probe must not be operated near strong electromagnetic fields, such as motors, pumps, or transformers, and a minimum distance of approximately 1 meter (3.28 ft) must be maintained. When mounted on or against steel parts, a minimum distance of 100 mm (3.94 in) must be maintained.
What are the acceptable process fluids?
Only process fluids that ensure the required chemical and physical properties of the materials in contact with the fluid, measuring electrodes, grounding electrode, lining, connection parts, protective cover, and protective flange are not affected during operation should be used. Fluids with unknown properties or abrasive fluids may only be used if the operator can ensure the device's safe condition through regular and appropriate testing. The information on the nameplate must be observed.
What are the safety warnings for handling the device?
The device must not be used as an elastic compensating piece in pipelines, as a safety ladder, or as a support for external loads. Material coating, such as by overpainting the nameplate or welding parts, is not allowed. Material removal, such as by drilling the housing, is also prohibited. The device must be checked for damage caused by improper transport before installation, and any transport damage must be documented on the shipping documents. All claims for damages must be made immediately before installation, against the freight forwarder.
What are the safety precautions for installation?
The flow direction must match the marking on the device, if present. The maximum torque for all flange bolts must not be exceeded. The device must be installed without mechanical stress (torsion, bending). Flange or intermediate flange devices must be installed with flat parallel counter-flanges. The device must only be installed for the intended operating conditions with appropriate seals. Flange bolts and nuts must be secured in the case of pipeline vibrations.
What are the safety guidelines for electrical installation?
The electrical connection must only be performed by authorized personnel according to the electrical plans. The instructions for electrical connection in the manual must be followed to avoid compromising the electrical protection class. The flow measurement system and the transmitter housing must be grounded. The power supply must be connected according to the applicable national and international standards. Each device must have a separate fuse installed close to the device and properly labeled. The rated current of the circuit breaker must not exceed 10 A. The device's protection class is I, and the overvoltage category is II (IEC664). The voltage supply and current circuit for the measuring probe coils are hazardous. The coil and signal current circuits must only be connected with ABB's measuring probes. The provided cable must be used. Only non-hazardous circuits may be connected to the other signal inputs and outputs.
What are the safety warnings for operation?
Contact with the surface of hot fluids may cause burns. Aggressive or corrosive fluids may damage the medium-contacting parts, leading to premature leakage under pressure. Erosion of the flange seal or process connection seals (e.g., aseptic pipe fittings, Tri-Clamp) may cause leakage under pressure. Internal flat seals may become brittle during CIP/SIP processes. Continuous pressure surges exceeding the device's rated pressure during operation may affect the device's lifespan. Warning: Danger to personnel! Bacteria and chemical substances may contaminate or poison pipeline systems and their materials. For EHEDG-compliant installation, the appropriate installation conditions must be observed. For EHEDG-compliant installation, the process connection seal combination created by the operator must consist only of EHEDG-compliant parts.
What are the safety symbols and their meanings?
The safety symbols and warning symbols indicate potential hazards. The 'Gefahr' symbol indicates an immediate danger that can lead to death or severe injuries if ignored. The 'Warnung' symbol indicates a potentially dangerous situation that may result in death or severe injuries if ignored. The 'Vorsicht' symbol indicates a potentially dangerous situation that may lead to minor injuries if ignored. The 'ACHTUNG' symbol indicates a potentially harmful situation that may result in damage to the product or other equipment. The 'WICHTIG' symbol indicates user tips or important information about the product or its additional benefits.
What are the safety precautions for transport?
The device's center of gravity may be off-center depending on the model. Protective covers or caps on process connections of PTFE/PFA-lined devices must not be removed immediately before installation to avoid cutting or damaging the lining, which could lead to leaks. The device must be checked for damage caused by improper transport before installation, and any transport damage must be documented on the shipping documents. All claims for damages must be made immediately before installation, against the freight forwarder.
Related products from ABB
FEH300
User manual 368 pages
FEH300
User manual 868 pages
FEP300
User manual 368 pages
CoriolisMaster FCB400
User manual 32 pages
COPA-XE
User manual 40 pages
Sensyflow FMT400-VTS
User manual 268 pages
MAG-XE
User manual 40 pages
FSM4000-S4
User manual 62 pages
FSM4000
User manual 62 pages
FSM4000
User manual 442 pages
FSM4000
User manual 448 pages
ODIN
User manual 64 pages
2CSG213625R4011
User manual 104 pages
2CSG213605R4011
User manual 104 pages
2CSG213655R4011
User manual 104 pages
2CSG213635R4011
User manual 104 pages
AMTD-1 P
User manual 104 pages
AMTD-2 P
User manual 104 pages
AMTD-1-R P
User manual 104 pages
VLMD P
User manual 104 pages