Broncolor RFS 2.1 (27 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I lock the RFS 2.1 unit?
To lock the unit, press the 'test' and 'set' buttons simultaneously. Hold for two seconds until 'SL' appears bright in the display. Release the buttons after two seconds to activate the lock.
How do I unlock the RFS 2.1 unit?
To unlock the unit, press the 'test' and 'set' buttons simultaneously. After two seconds, 'SL' in the display goes dark. Release the buttons after two seconds. The display shows the last active status, and the unit is unlocked.
What is the range of the RFS 2.1 transceiver?
The RFS 2.1 transceiver has a range of up to 50 meters outdoors and up to 30 meters indoors. The range is determined by the sync method used, either via the hot shoe or sync jack.
How do I set the studio address on the RFS 2.1?
To set the studio address, press the 'set' key briefly until the display blinks 'ST' and shows the studio number. Use the '' and '' keys to adjust the address, then press 'set' briefly to save the setting.
How do I adjust the lamp channel on the RFS 2.1?
To adjust the lamp channel, press the '' or '' keys briefly to change the lamp channel or studio channel. For full f-stop adjustments, press the keys for more than one second.
What is the battery life of the RFS 2.1 transceiver?
The RFS 2.1 transceiver uses a Li-Mn CR2450 lithium button cell (560 mAh, 3 V). With typical usage, the battery life is approximately 8 to 12 months or up to 100,000 flashes.
What is the power supply for the RFS 2.1 receiver?
The RFS 2.1 receiver uses a rechargeable battery pack for receiving mode, which includes two rechargeable batteries. It can also be powered via a USB power supply unit connected to the USB socket.
How do I reset the RFS 2.1 unit?
To reset the device to factory settings, press and hold the 'test' key, then press the 'set' key for more than four seconds. This will reset the unit to its default configuration.
What are the technical specifications of the RFS 2.1?
The RFS 2.1 transceiver operates at 2.4 GHz and has a transmission time of 0.425 ms. It supports up to 40 radio frequency channels, with a central shutter speed of up to 1/1500 s and a focal-plane shutter speed of up to 1/320 s.
What are the compatibility options for the RFS 2.1?
The RFS 2.1 is compatible with RFS 2 and RFS 2.1 units. It can communicate with multiple units set to the same studio address. However, RFS 2 units have limited functionality compared to RFS 2.1 units.