Wld-Tec Fuego SCS basic (104 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to choose the correct nozzle for the gas burner?
To select the correct nozzle, check the type of gas you are using. The device comes with a nozzle for natural gas (N, Ø 0.8 mm) pre-installed, and a propane-butane nozzle (P, Ø 0.5 mm) is located in the nozzle holder (16). Remove the P nozzle using a coin or a 17 mm wrench (R2), then replace it with the N nozzle. Ensure both nozzles are securely tightened after replacement. A third nozzle (B, Ø 0.45 mm) is available for use with the CV 360 adapter.
How to connect the gas supply to the burner?
Connect the gas supply to the gas inlet (10) using a DVGW-approved safety gas hose with threaded or hose connection. Ensure the hose is regularly checked for damage. For bottled gas, install a DVGW-approved pressure reducer (50 mbar) before connecting. Always use a wrench (SW17, R2) to tighten gas connections securely and ensure they are gas-tight. Use a soapy water solution or leak detection fluid to test for leaks.
How to safely turn off the gas burner after use?
After using the gas burner, ensure the gas supply is reliably closed and the device is turned off using the function button (1). If the device is not going to be used for an extended period, remove the batteries and store the device in a dry, warm place. Always check for gas leaks before turning the device back on and ensure all gas connections are secure.
What safety precautions should be taken when using the gas burner?
Always use the device under constant supervision. Keep the device away from flammable liquids and materials. Do not attempt to locate gas leaks with an open flame or by smoking. Ensure the device is not used if there is a gas odor or suspected leak. Never attempt to disconnect gas connections while the gas supply is on. Always wear safety goggles when operating the device.
How to replace the batteries in the [Fuego pro] model?
To replace the batteries, first turn off the device using the function button (1) and disconnect the gas supply. Remove the battery compartment cover (20) and take out the old batteries. Insert two new NiMH batteries (AA) into the compartment. Ensure the battery contacts are clean and free from debris. Never use non-rechargeable batteries or incompatible battery types. Always dispose of used batteries according to local regulations.
How to check for gas leaks in the system?
Before using the device, carefully inspect the gas supply for leaks. Use a soapy water solution or leak detection fluid to test all gas connections. If bubbles appear, there is a leak. Immediately shut off the gas supply and repair the connection. If a gas odor is detected, turn off the gas supply, remove the batteries, and contact a professional for assistance.
What is the purpose of the IR sensor in the device?
The IR sensor detects the presence of a flame and helps regulate the burner's operation. It can be used to automatically turn the device off when no flame is detected, ensuring safety. The sensor's range can be adjusted, and a double-click feature is available for additional control. Always ensure the sensor is clean and free from obstructions for accurate readings.
How to adjust the flame intensity on the burner?
To adjust the flame intensity, use the gas/air regulator (2) to control the mixture of gas and air. A higher gas flow will produce a hotter flame, while a lower gas flow will result in a cooler flame. Always ensure the flame is stable and within the safe operating range. If the flame appears unstable or too bright, adjust the regulator until the flame is steady and blue in color.
What should be done if the device displays a fault message?
If the device displays a fault message, such as a flame failure or overheating, immediately turn off the device and check for gas leaks or electrical issues. Refer to the troubleshooting section in the manual for specific error codes. If the issue persists, contact a qualified technician for further assistance. Never attempt to repair the device yourself if you are not trained to do so.
How to clean and sterilize the device?
To clean the device, first turn it off and allow the burner head (6) and flame opening (7) to cool down. Remove the burner head and clean it with a soft cloth. Ensure all gas connections are secure before reassembling the device. For sterilization, use a suitable disinfectant solution and follow the manufacturer's guidelines. Never submerge the device in water or use harsh chemicals that may damage the components.