Dea TEO 700 (80 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to unlock the motor reducer?
To unlock the motor reducer, pull down the handle indicated in Figure 7. This allows the door to move freely in the absence of other obstructions. The system will automatically reengage when the first operation is performed.
How to perform manual operation?
In case of anomalies or power failure, unlock the motor reducer and manually operate the door. Manual operation is critical in emergencies, as delayed action can lead to dangerous situations. Ensure the system is properly installed with original accessories for safe manual operation.
What are the technical specifications of TEO 700?
TEO 700 is an electromechanical operator for sectional doors. It operates on 230 V ~ ±10% (50/60 Hz), has a maximum push force of 1000 N, and a maximum of 35 movements per day. It features a 24 V control system, IP30 protection rating, and a weight of 4.3 kg with packaging.
How to install the TEO 700?
Install the TEO 700 by assembling the binary group to the main unit, fixing the rail to the main unit with omega brackets, mounting the support angle close to the main unit, and securing the rail to the door frame or wall. Ensure the rail is horizontal and the motor reducer is properly mounted on the ceiling.
How to connect the electrical wiring?
Connect the electrical wiring according to the provided diagram. Ensure the 230 V power cable is clearly separated from low-voltage safety cables by at least 4 mm in air or 1 mm through insulation. Use a dedicated 3x0.22mm² cable for the encoder connection.
How to program the TEO 700?
Programming involves setting the motor travel distance, canceling and learning radio commands, adjusting closing and opening force, and configuring photocells and automatic closure. Use the display to navigate parameters and confirm settings with the appropriate buttons.
How to adjust the closing force?
Adjust the closing force by accessing the parameter P2, using the navigation buttons to set the desired value, and confirming the selection. After adjustment, verify the force on the door to ensure the system is safe and compliant with EN12453 standards.
How to adjust the opening force?
Adjust the opening force by accessing parameter P5, using the navigation buttons to set the desired value, and confirming the selection. After adjustment, verify the force on the door to ensure the system is safe and compliant with EN12453 standards.
How to configure the photocells?
Configure the photocells by accessing parameter P3, using the navigation buttons to set H0 (deactivated) or H1 (activated), and confirming the selection. If photocells are not used, ensure P3 is set to H0 for safety.
How to perform maintenance on TEO 700?
Regular maintenance includes lubricating the chain and rotating pins every 6 months, checking the tightness of screws, and inspecting chain tension. In case of faults, refer to the troubleshooting guide and contact DEA System if the issue persists.
Related products from Dea
Ghost 100
User manual 17 pages
LOOK 351/SC
User manual 64 pages
LOOK 355/SC
User manual 64 pages
LOOK 355EN/SC
User manual 64 pages
LOOK 371/SC
User manual 64 pages
LOOK 372/SC
User manual 64 pages
LOOK 373/SC
User manual 64 pages
LOOK 374/SC
User manual 64 pages
OLI/N
User manual 76 pages
ANGOLO
User manual 88 pages
GEKO/X
User manual 100 pages
SPACE/N
User manual 104 pages
SPACE/N/L BOOST
User manual 104 pages
SPACE/N/XL
User manual 104 pages
SPACE
User manual 216 pages
SPACE XXL
User manual 216 pages
SPACE XL
User manual 216 pages