Nice spido SP6000 (78 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to check if the control unit is working properly?
After connecting the control unit, power it on and check that the OK Led flashes rapidly for a few seconds. If it does not, unplug the unit and check the connections and voltage input. Once the OK Led starts flashing regularly at 1-second intervals, the control unit is functioning correctly.
What is the purpose of the Photo-test function?
The Photo-test function checks the safety devices during operation to ensure they are working correctly. It puts the control unit and safety devices into 'category 2' as per UNI EN 954-1 standards. This function is essential for detecting obstacles and ensuring safe operation.
How to program the current sensitivity?
To program current sensitivity, use the PROG and PP buttons. The current sensitivity can be set to five levels, from minimum (level 1) to maximum (level 5). The default is level 3, which is suitable for most installations. Adjusting this parameter helps the system comply with EN 12453 and EN 12445 standards.
How to activate the Photo-test mode?
To activate the Photo-test mode, connect the photocells as described in section 2.3.3 and press and hold the PROG button until the OK Led remains on. Then press the STEP-BY-STEP button. The courtesy light will turn on, indicating the Photo-test mode is active.
What should I do if the OK Led does not light up?
Check that the power cable is correctly connected to the mains socket. Ensure there is 24Vac between terminals 3 and 4 of the terminal board. Also, verify that the fuse is working and replace it with a 2A rapid fuse if it has blown.
How to test the control unit after installation?
After installation, power on the control unit and check that the OK Led flashes at 1-second intervals. Test the safety devices by simulating obstacles and checking if the OK Led flashes rapidly twice. Perform a full opening and closing cycle, ensuring the door stops at the travel stops and that the system responds correctly to the Stop input.
What is the purpose of the Step-by-step button?
The Step-by-step button allows manual control of the door movement. It is used to check the mechanical operation of the door and to position the travel stop slides correctly. It is also used to test the system in a semi-automatic mode by simulating the Open - Stop - Close - Stop sequence.
How to program the pause duration in automatic mode?
To program the pause duration in automatic mode, press and hold the PROG button until the OK Led remains on. Then release the PROG button when the courtesy light has flashed the required number of times (equal to the pause duration in seconds). The pause must be between 5 and 250 seconds.
What are the technical specifications of the SP6000 control unit?
The SP6000 control unit operates on 230Vac ±10% at 50/60Hz or 120Vac ±10% at 50/60Hz. It has a 24Vac output for the flashing light and service supply, with a maximum current of 200mA. The maximum maneuver duration is 60 seconds, and the pause can be programmed between 5 and 250 seconds. The operating temperature range is -20°C to 70°C.
How to connect the photocells for the Photo-test function?
To connect the photocells for the Photo-test function, use the connections described in Figs. 6a-6b. Ensure the photocells are connected to the 'Photo' input and that the TX photocell transmitters are powered separately from the RX receivers. This configuration allows the system to detect obstacles during operation.
Related products from Nice
LFAB4000
User manual 48 pages
BFAB5024
User manual 48 pages
LFAB4024
User manual 48 pages
ME 3000
User manual 12 pages
ME 3024
User manual 12 pages
Climber CR 2024
User manual 12 pages
ROBO RO1000
User manual 76 pages
ROBO RO1000
User manual 100 pages
ROBO RO1124
User manual 100 pages
ROBO
User manual 76 pages
THOR
User manual 14 pages
THOR
User manual 16 pages
THOR
User manual 76 pages
THOR 1561
User manual 14 pages
THOR 1561
User manual 16 pages
THOR 1551
User manual 14 pages
THOR 1551
User manual 16 pages
SPIDER
User manual 16 pages
SPIDER
User manual 16 pages
THOR 2261
User manual 16 pages