Log in


or


google Continue with Google

Already have an account?

Bort BBG-6500 (28 pages)

0 out of 5
0 review

Tags

Loading...

Languages available:

No exact matches found. Please change your query

PDF page 6
Loading...
Need help?

Need help?

Do you have a question about the product that is not answered in the manual?

  • Receive updates on solutions
  • Get answers to your question

Ask a question

Select image (Optional)

Product description:

The Bort BBG-6500 is a portable generator designed for reliable power supply during outages or in remote locations. It features a 4-stroke engine with a power output of 6500 VA, ensuring sufficient energy for various applications. The generator is equipped with a low oil shutdown system and a voltage regulator to protect connected devices. It operates quietly and efficiently, making it suitable for both residential and professional use. The unit includes a fuel tank with a capacity of 4.5 liters, allowing for extended runtime. It is built with durable materials and includes a handle for easy transportation.

Frequently Asked Questions

How to check and fill engine oil?

Before starting the generator, ensure that the oil level is checked. The oil capacity is 0.6 liters. If the machine is not operating properly or if it unexpectedly stops, always verify the oil level with the device in a horizontal position. The generator has a low oil sensor which may cause shutdowns if the oil level is too low.

What type of fuel should be used?

Only unleaded petrol (octane rating 92 or higher) should be used as fuel. Ensure that any spilled fuel is cleaned up before starting the generator and never smoke while operating it.

How to start the generator?

To start the generator, open the fuel tap, turn on the engine switch, set the choke lever in a closed position (for restarting a warm engine, leave it in an open or half-open position), pull slowly on the starter cord until it engages and then pull sharply to start. Allow the motor to warm up before moving the choke lever to the open position.

What are the safety precautions when using this generator?

Never operate the generator in wet conditions or near water, avoid inhaling fuel vapors, and ensure that all extension cords used have sufficient capacity for the task. Always ground the generator by connecting a cable between its grounding terminal and an external earth point.

What should be done if the spark plug is OK but the engine won't start?

Check whether the fuel tap filter, fuel line, or carburetor are clean. If there's no spark when pulling on the starter cord, replace the spark plug.

How to maintain and service the generator regularly?

Perform daily checks of oil level, choke operation, and recoil starter function. Replace engine oil every 20 hours or one month, check and clean the fuel tap and filter after 50 hours, replace spark plug if necessary, and ensure all fittings are secure.

What type of oil should be used for different temperatures?

For general use, you can use an 'all-temperature' engine oil with the specification 10W-40. For temperature ranges below or equal to 0°C, SAE#10 is recommended; between 0°C and 25°C, SAE#20; between 25°C and 35°C, use SAE#30; for temperatures above or equal to 35°C, SAE#40.

How often should the generator be serviced?

Perform periodic maintenance every month (or after 20 hours of operation), replace engine oil. After three months or 50 operating hours, check and clean fuel tap/filter. Every six months or 100 hours, perform a full service including checking all fittings and fasteners.

What should be done if the generator is not starting?

Clean or replace the spark plug. Check the ignition system for faults; contact your service center if necessary. Ensure that compression levels are adequate, as low compression can prevent engine start-up. Also check for loose cylinder head bolts and damaged gaskets.

How to clean the air filter?

Remove the air filter cover, take out the element, wash it thoroughly in a solvent, apply a small amount of oil onto the filter element, squeeze out excess oil. Replace both the filter element and the cover. Ensure that the filter cover seals properly around all edges.

Send answer

Your opinion matters to us

Do you think we can improve or add something? Are there features missing or do you have suggestions for improvement? We would love to hear from you.

Give a rating

5 out of 5