LELY SPLENDIMO 320 MC (119 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to adjust the mowing height?
To adjust the mowing height, position the mowing bar forward or backward using the top bar (fig. 7). This allows you to set the desired cutting height for the grass.
How to set the cutting intensity?
The cutting intensity can be adjusted using the control valve (fig. 8) in the cutter, the rotor speed, and the position of the cutter and the top plate of the cutter. Adjust these settings to achieve the desired level of cutting force.
How to secure the machine during transport?
To secure the machine during transport, open the hydraulic system shut-off valve by pulling the cord (fig. 5), operate the dual-acting valve of the tractor, and fully retract the cylinder. Ensure the transport lock (via the valve) is closed (fig. 6) when the machine is in transport position.
How to set the height of the tractor hitch?
Set the height of the tractor hitch so that the pivot pins of the main shaft (fig. 4) are approximately 70 cm above the ground. Take into account the tread of the tractor tires to ensure proper alignment.
What safety precautions should be taken when operating the machine?
Always keep a safe distance from rotating parts, avoid standing in the danger zone of moving components, and ensure that all safety and protective devices are properly installed. Do not operate the machine if it is not fully secured, and never stand on the machine.
How to adjust the overlap between the front and rear mowers?
Adjust the overlap between the front and rear mowers by setting the tractor hitch arms to the correct height and ensuring sufficient overlap when working with a front mower. If the tractor has category III fulcrum points, mount the fulcrum pins on the category III side.
How to maintain the cutting blades?
Replace the cutting blades regularly to ensure optimal performance. Inspect the blades for wear or damage and replace them as needed. Ensure the blades are properly aligned and secured to prevent accidents.
How to adjust the hydraulic system pressure?
Adjust the hydraulic system pressure by setting the pressure to a different value. This allows you to control the cutting depth and adjust the machine's performance according to the terrain and grass conditions.
What should be done before starting the machine?
Before starting the machine, ensure that all safety and protective devices are properly installed, check that the tractor and hydraulic system are in good working condition, and confirm that all moving parts are stationary. Also, make sure no one is in the danger zone and that the machine is securely attached to the tractor.