Black+Decker STC1840 (120 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the intended use of the BLACK+DECKER trimmer?
The BLACK+DECKER trimmer is designed for trimming and finishing lawn edges and cutting grass in confined spaces. It is intended for consumer use only.
What safety precautions should be taken when using the trimmer?
Do not allow children or animals near the work area or to touch the appliance. Use the trimmer in daylight or good artificial light, in a dry location, and never immerse it in water. Always use safety glasses or goggles and keep hands and feet away from the cutting line.
What should be done if the cutting line becomes damaged?
If the cutting line is damaged, it should be cut off so that it just reaches the blade. Never use metal cutting line or fishing line, and always use the appropriate type of cutting line.
How should the trimmer be stored when not in use?
When not in use, the trimmer should be stored in a dry, well-ventilated place out of reach of children. Ensure the power supply cord is disconnected before storage.
What are the safety instructions for battery charging?
Charge the battery only at ambient temperatures between 10°C and 40°C. Use only the charger provided with the tool. Do not attempt to open or probe the charger, and never charge non-rechargeable batteries.
How do you attach the auxiliary handle to the trimmer?
Push the auxiliary handle onto the tube, slide the bolt into the hex-shaped hole, and tighten the knob by turning it clockwise. Ensure the handle is secure and aligned correctly.
How do you adjust the height of the trimmer?
To adjust the height, release the height adjust locking clamp, gently pull the tube up or down to the desired height, and close the clamp to lock it in place.
How do you replace the battery in the trimmer?
To fit the battery, line it up with the receptacle on the tool, slide it into place until it snaps. To remove, push the release button while pulling the battery out of the receptacle.
What should you do if the trimmer is not operating properly?
If the trimmer seems to not operate properly, check that the spool housing can rotate freely and that the cutting line does not protrude more than 11 cm. If the issue persists, contact a local BLACK+DECKER repair agent.
How do you rewind the spool from bulk line?
To rewind the spool from bulk line, remove the battery, feed the line into the anchoring slots, and wind it onto the spool in the direction of the arrow. Ensure the line is pulled tight and wound neatly in layers, not crisscrossed.
Related products from Black+Decker
ST4525
User manual 43 pages
ST5528
User manual 43 pages
ST5530
User manual 43 pages
GL20SC
User manual 61 pages
GL20S
User manual 61 pages
GL30
User manual 64 pages
GL430
User manual 64 pages
GL425
User manual 64 pages
GL425SC
User manual 64 pages
GL420
User manual 64 pages
GL680
User manual 72 pages
GL690
User manual 72 pages
GL315
User manual 84 pages
GL301
User manual 84 pages
GL350
User manual 84 pages
GL337SB
User manual 84 pages
BCSTA536
User manual 84 pages
BCSTA536L1-QW
User manual 84 pages
GLC1825L
User manual 100 pages
GLC1423L
User manual 100 pages