EINHELL 45.140.87 (112 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to safely operate the cordless angle grinder?
Always read the safety instructions carefully before use. Wear protective gear such as ear protection, dust mask, and safety goggles. Ensure the protective guard is properly installed and secure. Avoid using the tool without the guard, as it can cause serious injuries. Keep the tool away from children and ensure it is stored in a dry place with a temperature between +10°C and +40°C.
What is the maximum diameter of the grinding wheel?
The maximum diameter of the grinding wheel is 125 mm. Always use wheels that are compatible with the tool and ensure they are rated for the minimum speed of 8,500 min-1 and a circumferential speed of 56 m/s. Check the wheel's specifications before use to ensure it meets the required standards.
How to charge the Li-ion battery?
To charge the Li-ion battery, remove it from the tool and insert it into the charger. Ensure the charger's voltage matches the battery's voltage. The green LED on the charger will blink to indicate charging. Once fully charged, the LED will remain solid. Never charge a damaged or faulty battery, as it may cause overheating or damage.
What are the technical specifications of the tool?
The cordless angle grinder operates on a 18 V DC motor with a rated speed of 8,500 min-1. It uses a 125 x 22 mm grinding or cutting wheel. The charger provides 20 V DC output. The tool weighs 2.3 kg and has a vibration emission value of 5.354 m/s². Always ensure the tool is used within its specified parameters to avoid damage or injury.
How to replace the grinding wheel?
To replace the grinding wheel, use the provided arrester key. Ensure the motor is off and the tool is stationary. Remove the arrester key, loosen the flange nut, and replace the wheel. Tighten the flange nut securely. Always use a wheel that is rated for the tool's speed and avoid using damaged or worn wheels to prevent accidents.
What safety precautions should be taken when using the tool?
Always wear protective gear such as ear protection, dust mask, and safety goggles. Ensure the protective guard is properly installed and secure. Avoid using the tool without the guard. Keep the tool away from children and store it in a dry place. Do not use the tool for purposes other than its intended use, as this can lead to serious injuries or damage.
How to adjust the protective guard?
To adjust the protective guard, loosen the clamp lever, rotate the guard to the desired position, and secure it. Ensure the guard covers the gear housing correctly. The guard should be firmly attached to prevent any movement during operation. Never use the tool without the guard, as it can cause serious injuries.
What should be done if the battery is not charging?
If the battery is not charging, check the power outlet for proper voltage and ensure the charger is functioning correctly. If the issue persists, contact the service center or send the charger and battery for inspection. Never use a damaged or faulty battery, as it may cause overheating or damage to the tool.
How to maintain the tool for optimal performance?
Regularly clean the tool, especially the air vents and motor housing, to prevent dust buildup. Use a dry cloth or compressed air to clean the tool. Lubricate moving parts with a small amount of grease. Avoid overloading the tool and ensure it is stored in a dry place. Always follow the maintenance instructions in the manual to prolong the tool's lifespan.
What are the noise and vibration levels of the tool?
The noise level of the tool is 82.4 dB(A), with an uncertainty of 3 dB. The vibration level is 93 dB(A), with an uncertainty of 3 dB. Always wear ear protection to prevent hearing damage. The tool's vibration emissions are measured according to EN 60745 standards. Prolonged use may lead to health issues related to hand-arm vibration, so take regular breaks and use the tool as instructed.
Related products from EINHELL
BWS 125/850-2
User manual 8 pages
Bavaria BES 125E
User manual 28 pages
Bavaria BSS 105
User manual 18 pages
NTS 2000
User manual 20 pages
NTS 2000
User manual 20 pages
NTS 2000
User manual 20 pages
LE-WS 115
User manual 32 pages
Bavaria BNS 102
User manual 36 pages
Bavaria BSS 150/1
User manual 22 pages
BTS 400
User manual 38 pages
NWDG 150
User manual 32 pages
Bavaria BBS 720
User manual 32 pages
Bavaria BWS 125/850-1
User manual 40 pages
CC-PO 1100/1 E
User manual 148 pages
44.125.70
User manual 88 pages
BT-WD 150
User manual 72 pages
TE-AG 18 Li-Solo
User manual 120 pages
TC-AG 115 750W
User manual 152 pages
41.385.50
User manual 153 pages
44.607.31
User manual 186 pages