Ferm AGM1052 (120 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum speed of the grinding disc?
The maximum speed of the grinding disc must be larger than or equal to the maximum speed of the machine. Refer to the rating plate on the machine for the exact specifications.
How do I replace the grinding disc?
To replace the grinding disc, first switch off the machine and remove the mains plug. Follow the steps for mounting and removing the grinding disc as outlined in the manual, ensuring the spindle lock button is pressed during the process.
What safety precautions should I take when using the angle grinder?
Always wear safety goggles, hearing protection, and a dust mask. Keep bystanders away from the work area. Ensure the machine is properly grounded and avoid using damaged or blunt grinding discs. Never press the spindle lock button while the motor is running.
What should I do if the grinding disc becomes jammed?
If the grinding disc becomes jammed, release the on/off switch and hold the machine motionless in the material until the disc comes to a complete stop. Do not attempt to remove the machine from the workpiece or pull it backward while the disc is in motion.
What is kickback and how can it be prevented?
Kickback is a sudden reaction caused by a pinched, bound, or twisted grinding disc, which can cause the machine to lift and jump back towards the user. To prevent kickback, hold the machine firmly with both hands, position your body to the side of the disc, and ensure the grinding disc is not jammed.
What is the voltage rating of the machine?
The machine is rated for a mains voltage of 230 V, with a frequency of 50 Hz. Always ensure the power supply matches the voltage specified on the rating plate.
How do I mount the guard on the angle grinder?
To mount the guard, place the machine on a table with the spindle facing upwards, press the spindle lock button, and use the flange key to remove the flange. Secure the guard by tightening the screw and nut, then reattach the flange and any grinding disc as needed.
What should I do if the machine vibrates strongly?
If the machine vibrates strongly, immediately switch it off, remove the mains plug, and check for any issues. Ensure the grinding disc is properly mounted and the machine is balanced. If the vibration persists, stop using the machine and consult a qualified technician.
How do I clean the machine?
Before cleaning, switch off the machine and remove the mains plug. Use a soft cloth to clean the housing and keep the ventilation slots free from dust and dirt. If necessary, use a soft, moist cloth to clean the vents. Avoid using harsh chemicals that may damage the machine.
What should I do with the product at the end of its life?
The product, its accessories, and packaging must be sorted for environmentally friendly recycling. Do not dispose of power tools in domestic waste. According to the European Directive 2002/96/EC, power tools that are no longer usable must be collected separately and disposed of in an environmentally friendly manner.
Related products from Ferm
FVM-250N
User manual 16 pages
FPS-135
User manual 16 pages
FBSM-150/50
User manual 16 pages
FAG-230
User manual 18 pages
BS-702
User manual 18 pages
FBS-950
User manual 20 pages
FCS-180
User manual 20 pages
AGM1016
User manual 30 pages
FBS-1200
User manual 42 pages
FDAG-2000
User manual 48 pages
BGM1006
User manual 50 pages
FDAG-750
User manual 52 pages
PSM1031
User manual 60 pages
FAG-125/1050
User manual 80 pages
AGM1102
User manual 80 pages
bsm1023
User manual 92 pages
Delta Sander DSM1009
User manual 92 pages
AGM1054
User manual 104 pages
Agm1059
User manual 104 pages
ESM1013
User manual 104 pages