Ferm AGM1069P (176 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the power rating of the AGM1069P and AGM1070P?
The AGM1069P has a power rating of 2000W with an 180mm wheel, while the AGM1070P also has a power rating of 2000W but with a 230mm wheel. These models are designed for grinding and cutting applications.
What safety precautions should be taken when using the angle grinder?
Always wear eye protection and hearing protection. Ensure the power tool is disconnected from the mains before performing any maintenance or cleaning. Keep bystanders away from the work area to avoid injury from flying debris. Never place your hand near the rotating accessory, and ensure the cord is clear of the spinning accessory.
What are the technical specifications of the AGM1069P?
The AGM1069P operates on 230-240 V~ at 50 Hz with a power input of 2000W. Its rated speed is 8,500 RPM, and it has a 180mm wheel disc with a bore of 22.2mm and a thickness of 6mm. It is a Class II machine with double insulation.
How should the wheel disc be mounted on the angle grinder?
Use a suitable wheel disc with the correct diameter and bore for your model. Ensure the wheel disc thickness is 6mm for grinding and 3mm for cutting. Mount the disc by pressing the spindle lock button and tightening the clamping nut with a spanner. Ensure the wheel disc does not touch the safety guard.
What is the recommended angle for deburring?
An angle of inclination between 30º and 40º is recommended for deburring. Move the machine back and forth with light pressure to prevent the work piece from discolouring or overheating. Avoid using abrasive cutting discs for deburring work.
What should be done if the power cord is damaged?
If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or a similarly qualified person to avoid a hazard. Do not attempt to repair the cord yourself. Always switch off the machine and remove the mains plug before performing any maintenance.
How should the machine be cleaned and maintained?
Clean the machine casings regularly with a soft cloth, preferably after each use. Ensure the ventilation openings are free of dust and dirt. Use a soft cloth moistened with soapsuds for persistent dirt. Avoid using solvents like gasoline, alcohol, or ammonia, as they can damage synthetic components.
What is the vibration level of the machine during surface grinding?
The vibration level during surface grinding is 9.95 + 1.5 m/s². This value is measured in accordance with the EN 60745 standard and may be used to compare one tool with another. Prolonged exposure to vibration can increase the risk of health issues, so it is important to take precautions.
What should be done before starting the machine?
Before starting the machine, ensure the work piece is properly supported or fixed. Keep the supply cord away from the work area. Switch the machine on by pressing the On/Off switch, and wait until it reaches full speed before placing the wheel disc on the work piece.
What are the safety warnings related to kickback?
Kickback occurs when the rotating wheel is pinched or snagged, causing the power tool to move in the opposite direction. To prevent this, maintain a firm grip on the tool, avoid placing your hand near the rotating accessory, and ensure the wheel is not over-stressed. Always position yourself and bystanders away from the plane of the rotating accessory.
Related products from Ferm
FVM-250N
User manual 16 pages
FPS-135
User manual 16 pages
FBSM-150/50
User manual 16 pages
FAG-230
User manual 18 pages
BS-702
User manual 18 pages
FBS-950
User manual 20 pages
FCS-180
User manual 20 pages
AGM1016
User manual 30 pages
FBS-1200
User manual 42 pages
FDAG-2000
User manual 48 pages
BGM1006
User manual 50 pages
FDAG-750
User manual 52 pages
PSM1031
User manual 60 pages
FAG-125/1050
User manual 80 pages
AGM1102
User manual 80 pages
bsm1023
User manual 92 pages
Delta Sander DSM1009
User manual 92 pages
AGM1054
User manual 104 pages
Agm1059
User manual 104 pages
ESM1013
User manual 104 pages