Ferm AGM1080 (144 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum speed of the grinding disc?
The maximum speed of the grinding disc must be equal to or greater than the maximum speed of the machine. Always check the rating plate on the machine for the correct speed specifications.
How do I replace the grinding disc?
To replace the grinding disc, first switch off the machine and remove the mains plug. Follow the mounting and removal steps outlined in the manual, ensuring the spindle lock button is pressed during installation or removal.
What safety precautions should I take when using the angle grinder?
Always wear safety goggles, hearing protection, and a dust mask. Keep bystanders away from the work area. Ensure the machine is properly grounded, and never use the tool without the guard securely mounted.
What should I do if the grinding disc jams?
If the grinding disc jams, release the on/off switch and hold the machine motionless until the disc comes to a complete stop. Never attempt to remove the machine from the workpiece while the disc is still spinning.
What is the correct voltage for the machine?
The machine operates on a mains voltage of 230 V~. Always verify that the power supply voltage matches the voltage specified on the rating plate to avoid electrical hazards.
How do I mount the guard?
To mount the guard, place the machine on a table with the spindle facing up. Press the spindle lock button, remove the flange, and secure the guard by tightening the screw and nut. Ensure the guard is firmly attached for maximum safety.
What is the weight of the AGM1080 angle grinder?
The AGM1080 angle grinder weighs 2.34 kg. This weight is important for handling and stability during operation, especially when working with heavy materials.
What is the noise level of the machine?
The sound pressure level of the machine is 89 dB(A) with a K=3dB correction factor, and the acoustic power level is 100 dB(A) with a K=3dB correction factor. Always use hearing protection to mitigate the risk of hearing damage.
What should I do if the machine vibrates strongly?
If the machine vibrates strongly, immediately switch it off, remove the mains plug, and investigate the cause. Excessive vibration can indicate an imbalance or a damaged component, which should be addressed before resuming use.
How do I clean the machine?
Before cleaning, always switch off the machine and remove the mains plug. Use a soft cloth to clean the housing and ensure the ventilation slots are free from dust and dirt. Avoid using harsh chemicals that may damage the machine's components.
Related products from Ferm
FVM-250N
User manual 16 pages
FPS-135
User manual 16 pages
FBSM-150/50
User manual 16 pages
FAG-230
User manual 18 pages
BS-702
User manual 18 pages
FBS-950
User manual 20 pages
FCS-180
User manual 20 pages
AGM1016
User manual 30 pages
FBS-1200
User manual 42 pages
FDAG-2000
User manual 48 pages
BGM1006
User manual 50 pages
FDAG-750
User manual 52 pages
PSM1031
User manual 60 pages
FAG-125/1050
User manual 80 pages
AGM1102
User manual 80 pages
bsm1023
User manual 92 pages
Delta Sander DSM1009
User manual 92 pages
AGM1054
User manual 104 pages
Agm1059
User manual 104 pages
ESM1013
User manual 104 pages