Ferm AGM1120P (152 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to secure the machine before use?
Before using the machine, ensure it is unplugged. Always use both hands to operate the machine and never touch any rotating parts. Keep the machine away from the workpiece when switching it on and off.
What is the maximum speed of the machine?
The maximum speed of the machine is 3300 revolutions per minute. Ensure that the speed of the machine does not exceed the value indicated on the disc, as this is critical for safe operation.
How to control the speed of the machine?
The speed of the disc can be controlled using the rotary knob on top of the handle. The higher the position of the knob, the higher the speed. Avoid starting at a high speed when using wax on the polishing pad.
How to lock the On/Off switch?
To lock the On/Off switch, press the On/Off switch and then press the lock-on button. To release the switch lock, briefly press the On/Off switch again.
What safety precautions should be taken when using the machine?
Always wear safety goggles and hearing protection. Keep bystanders away from the work area. Ensure that the machine is double insulated and never use the spindle lock to stop the motor. Regularly clean the air vents to prevent overheating.
What should be done if the machine vibrates abnormally?
If the machine vibrates abnormally, immediately switch it off. Inspect the machine and disc before switching it on again. Ensure that the machine is not live during maintenance and that all parts are in good condition.
How to assemble the polishing pad?
To assemble the polishing pad, press the spindle lock, screw and tighten the pad holder on the spindle, depress the spindle lock, and mount the polishing pad onto the pad holder. Ensure that the pad is securely fastened before use.
What should be done if the machine is dropped or damaged?
If the machine or accessory is dropped, inspect for damage and install an undamaged accessory. Position yourself and bystanders away from the plane of the rotating accessory and run the machine at maximum no-load speed for one minute to test for damage.
What is the warranty coverage for this product?
The warranty conditions can be found on the separately enclosed warranty card. The product and user manual are subject to change, and specifications may be updated without further notice. Ensure that you contact the service address on the warranty card for any faults or repairs.
How to dispose of the machine responsibly?
Do not dispose of power tools into domestic waste. According to the European Directive 2012/19/EU, power tools that are no longer usable must be collected separately and disposed of in an environmentally friendly manner. Ensure that faulty or discarded electrical or electronic equipment is collected at appropriate recycling locations.
Related products from Ferm
FVM-250N
User manual 16 pages
FPS-135
User manual 16 pages
FBSM-150/50
User manual 16 pages
FAG-230
User manual 18 pages
BS-702
User manual 18 pages
FBS-950
User manual 20 pages
FCS-180
User manual 20 pages
AGM1016
User manual 30 pages
FBS-1200
User manual 42 pages
FDAG-2000
User manual 48 pages
BGM1006
User manual 50 pages
FDAG-750
User manual 52 pages
PSM1031
User manual 60 pages
FAG-125/1050
User manual 80 pages
AGM1102
User manual 80 pages
bsm1023
User manual 92 pages
Delta Sander DSM1009
User manual 92 pages
AGM1054
User manual 104 pages
Agm1059
User manual 104 pages
ESM1013
User manual 104 pages