Migatronic Green Pointer X2 (26 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum diameter of tungsten electrode that can be ground?
The Green Pointer X2 is designed to grind tungsten electrodes with diameters ranging from 1.0 mm up to a maximum of 4.0 mm.
How do you adjust the grinding angle on the machine?
To set the grinding angle, loosen the knurled wheel (22), position the degree mark at the desired angle on the electrode holder guide (20), and then tighten the knurled screw again to secure it.
What is the power rating of Green Pointer X2?
The machine has a motor power rating of 850 Watts, which provides sufficient energy for efficient grinding operations with tungsten electrodes.
How do you replace the filter cassette on Green Pointer X2?
To change the filter, first loosen the allen screw (25.3) at the filter housing (25), remove the filter cover (25.2), take out the old filter cassette (26), and insert a new one ensuring that the rubber seal is tightly fitted to the grinding head.
What safety precautions should be taken when using Green Pointer X2?
Always ensure the electrode holder is in the guide channel before starting the machine. Never remove it until the motor has completely stopped. Only authorized personnel may perform repairs, and the power supply must be disconnected during maintenance.
What are the recommended RPM settings for different electrode diameters?
The speed adjustment depends on the diameter of the tungsten electrode: 3 for 1.0 mm, 3 for 1.6 mm, 2 for 2.0 mm, 2 for 2.4 mm, 1 for 3.2 mm, and 1 for 4.0 mm.
How do you determine the correct stick-out length of the electrode?
To set the stick-out length, insert the electrode into the depth setting gauge (12) until it reaches the allen screw (15), then tighten to secure and adjust as needed for precise grinding.
What is the weight of Green Pointer X2?
The machine weighs 2.5 kg, making it portable and suitable for use in various industrial environments including small workshops and on-site welding operations.
How do you clean the grinding head chamber after use?
After completing the grinding process, if the grinding head is dirty, it can be cleaned using an alkaline cleaning solution followed by rinsing with warm water. Ensure to remove the filter before cleaning.
What are the different grinding positions available on Green Pointer X2?
The machine allows for three distinct grinding positions: inside (left mark), center (center mark), and outside (right mark). These can be selected by adjusting the eccentric plate to align with the desired position.