Snap-On CTPP861 (96 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What safety precautions should be taken when using the cordless polisher?
Always keep your hands and body away from moving parts. Wear eye, ear, and respiratory protection. Ensure the tool is disconnected from power before making adjustments or changing accessories. Avoid using the tool in explosive atmospheres or near flammable materials.
How should the battery be handled to avoid risks?
Never expose the battery to extreme temperatures. Store it away from conductive materials. Do not attempt to disassemble or modify the battery. If the battery is damaged or leaking, flush it with water and seek medical help if necessary.
What should be done if the tool overheats?
If the tool overheats, it will temporarily stop working. Allow it to cool for about 1 minute. A hot battery may take over 15 minutes to cool. If the battery is close to needing recharging, consider using another battery to finish the job.
How do you select the low speed polishing setting?
Turn the tool off and let it stop completely. Slide the Hi-Lo switch to the left to position 1. Use 3" foam pads and wool bonnets for polishing. Ensure the battery is removed before making any adjustments.
What are the specifications of the tool?
The tool has a motor voltage of 14.4 VDC, a spindle thread of 5/16" -24UNF, and a weight of 1.9 lbs (0.86 kg) with the battery pack. It operates within a temperature range of -4°F to 140°F and has a noise level of 73.0 dB.
How long does it take to charge the battery?
The CTB8172BK battery takes approximately 55 minutes to charge, while the CTB8174 takes about 70 minutes. The battery capacity is 2.0 A•H for the CTB8172BK and 2.5 A•H for the CTB8174.
What should be done if the tool is overloaded?
If the tool is overloaded, the internal electronics will cause it to stop working. This prevents damage from under voltage, over temperature, or over current. Release the trigger to resume operation once the tool has cooled down.
How do you lock the trigger to prevent accidental starting?
Depress the forward/lock bar to place the switch in the center lock position. This locks the trigger in the OFF position, reducing the risk of accidental starting when the tool is not in use.
What is the recommended accessory for high speed sanding?
For high speed sanding, use 2" diameter sanding discs and accessories rated at or above the RPM listed on the tool's nameplate. Use the Roloc adaptor CTPP761-951 with 2" Roloc backing pads and surface discs.
What should be done with used batteries?
Do not throw away used batteries. Return them to a Snap-on authorized repair center for recycling. This helps protect the environment and conserve natural resources.