Stanley Fat Max FME821 (96 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the intended use of the Stanley Fat Max angle grinder?
The Stanley Fat Max angle grinder FME821, FME822 is designed for grinding and cutting metal and masonry using the appropriate type of cutting or grinding disc. It is intended for professional and private, non-professional users when fitted with the appropriate guard.
What are the general safety warnings for power tools?
Always read all safety warnings and instructions. Failure to follow them may result in electric shock, fire, and/or serious injury. Keep the work area clean and well-lit, avoid operating in explosive atmospheres, and ensure children and bystanders are kept away from the tool.
How should you handle the power tool's cord?
Avoid body contact with earthed or grounded surfaces. Do not expose the power tool to rain or wet conditions. Never use the cord for carrying, pulling, or unplugging the tool. Keep the cord away from heat, oil, sharp edges, or moving parts.
What should you do if the power tool is used in a damp location?
Use a residual current device (RCD) protected supply to reduce the risk of electric shock. Ensure the tool is not used in damp locations unless necessary, and if so, use an RCD to protect against electric shock.
What personal protective equipment is required when using the tool?
Always wear eye protection such as safety goggles or a face shield. Use a dust mask if needed, and wear rutschfeste (non-slip) safety shoes. Consider using hearing protection in noisy environments.
How do you fit the guard on the tool?
Place the tool on a table with the spindle facing up. Release the clamping lock, align the lugs with the notches, press the guard down, and rotate it counterclockwise to the required position. Fasten the clamping lock to secure the guard.
What is the correct procedure for fitting grinding or cutting discs?
Ensure the guard is fitted first. Place the inner flange on the spindle, then the disc. For grinding discs, the raised centre on the outer flange must face the disc. For cutting discs, it must face away. Tighten the outer flange using the two-pin spanner.
What is the rated speed of the tool?
The rated speed of the Stanley Fat Max angle grinder is 12,000 revolutions per minute (min-1).
What is the maximum disc thickness supported by the tool?
The maximum disc thickness supported by the tool is 6 mm for grinding discs and 3.5 mm for cutting discs.
What is the soft start feature of the tool?
The soft start feature allows a slow speed build-up to avoid an initial jerk when starting the tool. This is particularly useful when working in confined spaces.
Related products from Stanley
FatMax FMEW204
User manual 44 pages
FatMax FMEW204K-QS
User manual 44 pages
FatMax KFFMEW200
User manual 44 pages
FATMAX KFFMEG841
User manual 72 pages
FATMAX SFMCW220D1S-QW
User manual 76 pages
FatMax FMCW210
User manual 80 pages
FATMAX SFMEE500
User manual 84 pages
FATMAX SFMCW221D1S
User manual 92 pages
FATMAX SFMCW221
User manual 92 pages
Fat Max FME822
User manual 96 pages
FatMax FME700
User manual 100 pages
Fatmax SFMCW223B
User manual 104 pages
FatMax FME841
User manual 104 pages
FATMAX FMEG232
User manual 108 pages
FATMAX FMEG232
User manual 120 pages
FATMAX SFMCE210
User manual 112 pages
FATMAX SFMCE210
User manual 112 pages
FATMAX SFMCE210
User manual 112 pages
FATMAX SFMCE210B-XJ
User manual 112 pages
FATMAX FMEG615
User manual 116 pages