Arcotherm EC 85 (23 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What type of heating system is the Arcotherm EC 85 and how does it work?
The Arcotherm EC 85 is a portable indirect oil‑fired heater that transfers heat via a forced‑air heat exchanger rather than supplying combustion gases into the warmed space. This design provides reliable, clean warm air for workshops and sites, reduces emissions in occupied areas, and improves safety. For best results, ensure exhaust ducting and fresh‑air supply are correctly installed and keep air inlets unobstructed.
What fuel does the Arcotherm EC 85 use and what fuel quality is recommended?
The EC 85 is designed to run on light heating oil or diesel‑grade fuel appropriate for indirect oil burners. Using clean, treated fuel reduces deposits, improves combustion efficiency, and lowers maintenance needs. Always strain fuel to remove water and contaminants and follow fuel‑storage best practices to avoid clogged nozzles and premature wear.
How large an area can the EC 85 heat and what affects its coverage?
With a nominal output of 85 kW the EC 85 is suited to medium to large spaces such as workshops, warehouses and construction halls. Actual coverage depends on insulation, ceiling height, outdoor temperature and heat loss. To estimate needs, calculate site heat loss and match the heater’s duty cycle to required setpoints for efficient operation.
How does the integrated thermostat control temperature and save fuel?
The built‑in thermostat regulates burner operation by comparing measured temperature with the setpoint, cycling the unit to maintain stable conditions. This reduces unnecessary run time and fuel consumption while improving comfort. For efficiency, set a moderate setpoint, avoid large temperature swings, and position the sensor where it represents average room temperature.
What safety features protect users from flame failure or overheating?
The EC 85 includes automatic flame failure detection and overheat protection that shut the burner down if unsafe conditions occur, protecting equipment and personnel. These systems lower fire and damage risk while enabling safer unattended operation. Regularly test the safety interlocks and keep clearances to combustible materials to preserve protection.
Is the Arcotherm EC 85 suitable for indoor use and what ventilation is required?
Being an indirect heater, the EC 85 keeps combustion products separate from supply air but still requires proper flue exhaust routed outdoors and adequate make‑up air. The unit should be used in well‑ventilated spaces with correct exhaust installation to prevent pressure imbalances and ensure safe, efficient operation. Verify local ventilation standards before deployment.
What routine maintenance does the EC 85 require to remain reliable?
Regular maintenance includes cleaning the combustion chamber and heat‑exchanger surfaces, checking and replacing fuel and air filters, inspecting seals, and verifying burner nozzle condition. Scheduled inspections preserve efficiency, reduce emissions, and extend service life. Keep a maintenance log and perform annual professional servicing or more frequently in dusty or high‑use environments.
How portable is the unit and what setup is needed on site?
The EC 85 is mounted on wheels and has a compact design for easy relocation around temporary sites; for safe setup you should place it on a level, stable surface, secure exhaust connections, connect the fuel supply and provide suitable electrical power. Use mechanical assistance for lifting and maintain required clearances from walls and combustibles during operation.
What is the typical fuel consumption and how can I estimate running costs?
Fuel consumption depends on load and burner efficiency; as an example, using diesel with roughly 10 kWh per liter and assuming around 90% system efficiency, full 85 kW output corresponds to about nine to ten liters per hour. This example shows how to estimate costs, but measure actual consumption on site and adjust for duty cycle and ambient conditions for precise budgeting.
How noisy is the Arcotherm EC 85 and can it be used in occupied areas?
The EC 85 generates moderate operational noise from the combustion fan and burner, typical for industrial forced‑air heaters; it is generally acceptable in workshops and construction zones but may be intrusive in office or residential environments. Place the unit away from workstations, use acoustic barriers if needed, and provide hearing protection for nearby workers during extended operation.