Argo WILLIS (72 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the IP rating of the product?
The product has an IP22 rating, which means it is protected against solid objects larger than 12.5 mm and water droplets falling vertically. It can be used in bathrooms in zone 2.
What are the electrical requirements for the product?
The product requires a 230V~50-60 Hz electrical supply. Ensure that the power source matches these specifications before connecting the device.
How should the product be installed?
Install the product on the wall at a minimum distance of 1.8 meters from the floor and 30 cm from the sides of the wall. It should not be placed on the floor. Make sure it is securely mounted before use.
What safety precautions should be taken when using the product?
Keep the product away from flammable materials, water sources, and heat sources. Ensure children are not left unattended near the device. Avoid touching the hot surfaces and never use the product in areas with flammable vapors or dust.
How do you turn the product on and off?
Press the ON/OFF button on the control panel to power the device. To turn it off, press the same button again. Always unplug the device when it is not in use or during maintenance.
What are the available heating modes?
The product offers three heating modes: COMFORT, ECO, and ANTI-ICE. COMFORT is the default mode with a temperature range of 6°C to 31°C. ECO mode operates between 10°C to 35°C. ANTI-ICE mode sets the reference temperature to 7°C and cannot be adjusted.
How do you set the timer for the product?
Press and hold the TIMER button for 3 seconds to access the timer settings. Choose the desired time interval (2H, 4H, 8H) or set a custom time between 0 and 9 hours using the up and down buttons.
How do you use the window sensor function?
To activate the window sensor, press the SELECT and MODE buttons together for 3 seconds. The temperature setting will appear on the display. To deactivate it, press the same buttons again for 3 seconds.
How do you replace the remote control battery?
Open the battery compartment on the back of the remote by pressing and pulling the cover. Insert the CR2025-3V lithium/manganese battery, ensuring the polarity is correct. Remove the plastic tab before use to allow the remote to function.
How should the product be cleaned and maintained?
Use a soft cloth to wipe the exterior. For heavy dirt, use a damp cloth with neutral detergent at a temperature below 50°C. Allow the device to dry completely before use. Do not use corrosive cleaners or solvents. Clean the air vents with a vacuum cleaner and avoid using oils or chemicals on the surface.