Boneco U7145 (164 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I turn the device on and adjust the mist output?
To turn the device on and adjust the mist output, rotate the knob clockwise. This action both powers the device and adjusts the mist output from low to high.
How do I set the desired humidity level?
To set the desired humidity level, rotate the knob clockwise. The device allows you to set the relative humidity between 40% and 60%. For precise settings, rotate the knob approximately to the vertical position. The humidity sensor has an accuracy of +/- 5%. If the humidity exceeds the set level, the device will automatically turn off. If the knob is turned all the way to the right, the continuous operation mode is activated.
How do I check the water level in the tank?
The water level in the tank is clearly visible through the transparent tank. The device also indicates when the tank is empty. A red indicator light (symbol C) illuminates when the water level is low. For more information, refer to the 'Filling the Water Tank' section. After inserting a full tank, it may take a few seconds for the red indicator to turn off.
What should I do if the water tank is empty?
If the water tank is empty, the device will automatically turn off. Ensure the tank is filled with fresh, cold tap water before turning the device back on. Do not add any additives to the water, as they can damage the device and void the warranty.
Can I use essential oils or other additives in the water tank?
No, you must not use any additives such as essential oils, fragrances, or water treatment products. Even a small amount can damage the plastic components and cause cracks. The device is not designed for use with additives. Any additive can damage the water tank and render the device unusable, and such damage is not covered by the warranty.
How often should I replace the descaling cartridge?
The descaling cartridge should be replaced every 2 to 3 months on average. However, the frequency may vary depending on the hardness of the water. To ensure optimal performance, soak the descaling cartridge in water for at least 24 hours before use.
What should I do if the device is not working properly?
If the device is not working properly, turn it off and check for any damaged cables or plugs. Do not use the device if the power cable is damaged. Also, ensure the device is placed on a flat, dry surface and not near a heater. If the issue persists, contact a qualified technician for repairs.
Where should I place the device for optimal performance?
Place the device on a flat, dry surface, elevated if possible (e.g., on a table or shelf). Avoid placing it directly on the floor or near a heater, as the mist can damage the floor surface. Maintain a distance of at least 50 cm from plants or objects to prevent damage.
What should I do if the device overheats?
If the device overheats, turn it off immediately. Ensure the device is placed on a stable, flat surface and not obstructed. Do not attempt to open the device or interfere with the mist chamber while it is operating. If the issue persists, contact a qualified technician.
How do I maintain the device to ensure long-term performance?
To maintain the device, regularly clean the exterior and check for any signs of damage. Ensure the power cable is not pinched or damaged. Replace the descaling cartridge as needed and avoid using any additives in the water tank. Follow the instructions in the manual for proper maintenance and to ensure the device functions optimally.