Geberit ACO 201 (266 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to ensure safety when using the ACO 201 press tool?
Always read the manual thoroughly before use. Keep the workspace clean and free of distractions. Keep children and others away from the tool. Store the tool in a locked area when not in use. Avoid using the tool when tired or under the influence of alcohol, drugs, or medications. Wear appropriate personal protective equipment, including safety glasses, and avoid loose clothing or jewelry.
What should I do if the tool is not working properly?
Check the LED indicators for fault codes. If the green LED is blinking, ensure the retaining pin is fully inserted. If the red LED is blinking, the battery may be low or there could be a fault. Refer to the troubleshooting section for specific error codes and corresponding actions. If the issue persists, contact an authorized service center.
How to charge the battery of the ACO 201?
Use only the original charger recommended by the manufacturer. The battery reaches full capacity after four to five charging cycles. Do not leave the battery inside the tool during storage or transport, as it may discharge. Always charge the battery before first use and ensure it is fully charged for optimal performance.
What are the technical specifications of the ACO 201?
The ACO 201 operates on 14.4 V DC with a power consumption of 375 W. It has a rated force of 32 kN and weighs 3.1 kg. The noise level is 68 dB(A), and the vibration level is ≤ 2.5 m/s². The operating temperature range is between -20°C and +60°C. The battery capacity is 2.4 Ah.
How to prepare the tool for use?
Insert the appropriate press jaws or intermediate jaws into the tool. Ensure the retaining pin is fully pressed in. Charge the battery fully before starting. Remove the battery if the tool will not be used for an extended period. Always check that the tool is in the standby mode before beginning any operation.
What should I do if the green LED is blinking during operation?
A blinking green LED indicates a fault. Check if the retaining pin is fully inserted. If the battery is low, charge it immediately. If the issue persists, refer to the troubleshooting section. If the problem continues, stop the operation and contact an authorized service center for further assistance.
What does the red LED indicate?
A red LED indicates a fault or error condition. This may be due to an incorrect operation, low battery, or a malfunction. Stop the tool immediately and check the LED code in the troubleshooting section. If the issue persists, contact an authorized service center for repair or replacement.
How to reset the tool after a fault?
Press the stop button to clear the fault indication. If the tool is in a fault state, press the start button for about two seconds to reset the system. Ensure the battery is fully charged before attempting to reset. If the fault persists, consult the troubleshooting guide or contact an authorized service center.
What should I do if the tool is not responding to the start button?
Ensure the tool is in the standby mode and the battery is fully charged. If the green LED is not lit, press the start button for about two seconds to activate the tool. If the issue persists, check the battery condition and contact an authorized service center for further assistance.
What are the safety precautions when using the ACO 201?
Never place your hands or body in the area of the press jaws. Keep the tool away from flammable liquids and explosive gases. Avoid using the tool if you are not trained or if you are under the influence of alcohol or drugs. Always wear protective gear, including safety glasses, and ensure the tool is stored securely when not in use.